Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just a little input, I had -5s on my rb26 on pump and full boost was at 5100 rpms. For track it was USELESS, for straight roads though it was marvelous!

To make the -5s work, you really need to build the engine such as Piggaz which I've been in before but you have to build it correctly. I've also been in RS's with a standard 26 and you will notice the difference but again, either build the engine to suit the turbos, or pick the turbo to your engine.

Again, I will just repeat what the others have already stated, E85 vs pump fuel is VERY different.

Also, -9s may have good response but they run out of puff if you want start to aim for more power where as the -5s will be able to go a little further.

I would say you have a few decisions to make before you make your choices (E85 or pump, 26 or stroker +, purpose of car, power vs response, etc).

Just a little input, I had -5s on my rb26 on pump and full boost was at 5100 rpms. For track it was USELESS, for straight roads though it was marvelous!

To make the -5s work, you really need to build the engine such as Piggaz which I've been in before but you have to build it correctly. I've also been in RS's with a standard 26 and you will notice the difference but again, either build the engine to suit the turbos, or pick the turbo to your engine.

Again, I will just repeat what the others have already stated, E85 vs pump fuel is VERY different.

Also, -9s may have good response but they run out of puff if you want start to aim for more power where as the -5s will be able to go a little further.

I would say you have a few decisions to make before you make your choices (E85 or pump, 26 or stroker +, purpose of car, power vs response, etc).

was there much get up and go before 5k? or you really had to wait for it? Then again, Once your at 5k, anther 2.5k and its pretty much next gear...Then youve got to build up to that again....

As good as the -5s sounds with the added power, And added room for more things in the future. Its really not going to be used to there full potential.

Going to buy the -9s!! f**k it. worst comes to worst i can sell and upgrade.

was there much get up and go before 5k? or you really had to wait for it? Then again, Once your at 5k, anther 2.5k and its pretty much next gear...Then youve got to build up to that again....

As good as the -5s sounds with the added power, And added room for more things in the future. Its really not going to be used to there full potential.

Going to buy the -9s!! f**k it. worst comes to worst i can sell and upgrade.

Well I'm in a 34 so I still have 4k left to go before next gear haha but I never dropped out of boost. Once it was on, it was ON!!! On my setup, it started to build around 3800rpms so anything under that was a little boring. My old R33 GTR had -7s and I thought that was a really good setup, managed 320kws and the response was excellent. Perfect for track conditions but being such small turbos, they ran out of puff top end. I believe GTRSean has -9s which I've also been in and those were great turbos too. I do believe Levinboy has them too and his produced pretty good results.

2.6 = SS's/-9's. Without a big dollar head and setup.

2.8 and bigger = -5's.

It's that simple, unless you're a nuckle dragger 'drag racer' that likes 'peaky power' which feels quicker.... Then they get smashed around twisties by a car that has 100 KW less peak figure.

Average power will belt peaky power every time AND be easier to drive.

Well I'm in a 34 so I still have 4k left to go before next gear haha but I never dropped out of boost. Once it was on, it was ON!!! On my setup, it started to build around 3800rpms so anything under that was a little boring. My old R33 GTR had -7s and I thought that was a really good setup, managed 320kws and the response was excellent. Perfect for track conditions but being such small turbos, they ran out of puff top end. I believe GTRSean has -9s which I've also been in and those were great turbos too. I do believe Levinboy has them too and his produced pretty good results.

hmm didnet know the 34gtr had a Bigger RPM limit? then the other rb26's

I dont get how a turbo such as the -9 can really run out of puff though, Dropping a little boost toward the top end i undderstand. But from feeling the way levinboy's pulled it was not running out at all. And once it drops out of the sweet spot, You would just go next gear. Seems pointless sitting above 8k if its not needed. But as you said, On the bigger blowers it is

2.6 = SS's/-9's. Without a big dollar head and setup.

2.8 and bigger = -5's.

It's that simple, unless you're a nuckle dragger 'drag racer' that likes 'peaky power' which feels quicker.... Then they get smashed around twisties by a car that has 100 KW less peak figure.

Average power will belt peaky power every time AND be easier to drive.

yer, Although my motor is built. Its nothing to write home about. Sure it will bring some reliability and piece of mind.( fingers crossed) its not something i really want to be sitting at redline to get a bit of power.

-9s it is.

i should almost stay off here till i pay for them so my mind is not swayed once again :)

2.6 = SS's/-9's. Without a big dollar head and setup.

2.8 and bigger = -5's.

It's that simple, unless you're a nuckle dragger 'drag racer' that likes 'peaky power' which feels quicker.... Then they get smashed around twisties by a car that has 100 KW less peak figure.

Average power will belt peaky power every time AND be easier to drive.

Even a Car with a big midrange and 30-40kws less peak will be quicker at the drag strip, unless you have a dog box/auto with short close gearing to keep it in the power

hmm didnet know the 34gtr had a Bigger RPM limit? then the other rb26's

I dont get how a turbo such as the -9 can really run out of puff though, Dropping a little boost toward the top end i undderstand. But from feeling the way levinboy's pulled it was not running out at all. And once it drops out of the sweet spot, You would just go next gear. Seems pointless sitting above 8k if its not needed. But as you said, On the bigger blowers it is

I said the -7s... not -9s :D

You will not be disappointed with the -9s until the power bug hits and you want more haha

Even a Car with a big midrange and 30-40kws less peak will be quicker at the drag strip, unless you have a dog box/auto with short close gearing to keep it in the power

That's what I said man.

Area under the curve. Peak numbers are pub talk!

Im expressing the fact,

Once you start on the road for power, you will always want more power. You get used to the power curve, and seeing as we all are adrenaline junkies, I want MOAR!!! haha.

But no Im not bored, I love it.

Wait till you hit the track then you will want bigger brakes!! And more suspension components hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I didnt present too many conclusions because I wanted your opinions and feedback based on your own experiences. I don't know the exact material, but it is similar to concrete and therfor only has valuable strength in compression. The forces on the set material once the head is removed would mostly be in compression since the grout wants to retain its shape and the block wants to return to its relaxed state since it's still within the elastic region. The grout would theoretically make the block more rigid. The exact amount would take a better setup on my end. Thought experiment: Instead of aliens, twist your favorite fleshlite. Now fill it with grout and allow it to sit for a week. Now try to twist it again. Observe what you see. Now get your other one and blow into it. Observe what you see. Now put it into a can and fill the space between your fleshlite and the can. After it sets blow into it. Less movement in torsion and less expansion i hope.   
    • Hi. Yeah i think that DIS-008 should be ok too but i rather asked. The R8 coils are "sadly" no go for me cuz every solution is for forward plenum. The coils are too tall and one of the(4/5 DK) would not fit under stock J-pipe. And being this NA RB20 i dont even know where to get some forward plenum.(and of course i would need other stuff like custom AFM/ECU etc) and that is kinda non sense for NA without boost. I just looking for solutions for my case 🙂  I try look into those Yaris/Corolla ones.  
    • Damn it, no, I topped up before I got to yours I really should look at Costco locations more when I'm out and about burning through fuel
    • Did you hit the one 5 minutes down the road from my place before heading back south? 😛
×
×
  • Create New...