Jump to content
SAU Community

Rb20Det Converted To Na.

skyline32sup
 Share

Recommended Posts

WMDC35 Experienced

WMDC35

Posted
Posted

Sv6 runs what a high 14 standard, a turbo r33 runs a low 14

Your 50hp turbo less r33 will not beat an sv6

So pull the other leg son

This!, I recently sold a VE SV6 & i've many DE daily drivers, unless the sv6 has something big time wrong with it, it will dish you a beating, an exhaust that big on an NA will just be a megaphone

Super Drager Mentor

Super Drager

Posted
Posted

That was just between driving one and drivin mine i will be taking it to wsid in next few weeks and il post pics of time slips

Please do, i'll come and watch.... hell i might even run again.

Jamie86 Newbie

Jamie86

Posted
Posted

Il put up the date I'm going when I figure out work times, I must be very wrong in terms of driving one from the other and I will admit I'm wrong but from what I could remember didn't seem

That much quicker, il put a 0-100 vid up and you can see if it what I think it is or if I'm way off any ideas on what a normal de is?

Jamie86 Newbie

Jamie86

Posted
Posted

Has oil return lines to sump and det on plate so I'm pretty sure it was det

Never put a car down quarter so I have no idea what it would be

Dunno why so many people are so negative I'm

Not out trying to prove its a monster I was just saying it doesn't go as bad as every makes out

Its still ball of fun to drive

Sorry of I upset some people by saying the sv6 thing but that's what I thought

mad082 Grand Master

mad082

Posted
Posted

the main point we are all making is that it will be noticably slower than a factory non turbo skyline, for the simple fact that the engine is running much less compression. so that, and the fact that other people have done this and put it on the dyno and made about the same power as a hyundai excel. however the condition of the engine comes into play a bit. a very healthy DET will have similar compression to a rather unhealthy DE. however an unhealthy DET (that may still seem ok to drive with the turbo still attached) will be well down on compression compared to a healthy DE (to the tune of about 30%)

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was ￡307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • sonicii
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By sonicii · Posted

      As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...