Jump to content
SAU Community

Recommended Posts

I had some ignition problems a few days back and called the nrma (it was after work and i had no tools on me ok).

After looking over the car we traced the problem to a loose lead (previous owner must have bent the contact out of shape so i could come loose.

Anyway thats no the point of all this.

One thing the mechanic mentioned to me is that as far as he knew skylines needed what was known as a high discharge battery or something of a similar name. he said that these batteries are vented and pointed out what looked to be a vent hole just to the left of the battery when viewed from the boot.

According to him the high power requirments mean that alot of gas is produced and if that is not correctly handled and left to build up a stray spark COULD (please note could not will) ignite those gas's hence the venting hole.

I've done a search and found a few comments about the right battery etc etc but no one has mentioned this.

Can anyone confirm or deny this.

Link to comment
https://www.sau.com.au/forums/topic/39738-odd-battery-fact/
Share on other sites

I just got a new battery the other day and the mechanic didnt mention anything about having to get a high output battery or whatever. All he said was to take the black plastic box off the battery because it will cause it to overheat and die earlier.

Link to comment
https://www.sau.com.au/forums/topic/39738-odd-battery-fact/#findComment-811610
Share on other sites

Can't comment on your mechanic's comments re the high discharge stuff, however the battery area is vented to air because it is in the boot, any battery can produce gasses. As far as I know ...the Skyline power requirements are no more than any other modern car with fuel inj, power everything and air con etc.

Link to comment
https://www.sau.com.au/forums/topic/39738-odd-battery-fact/#findComment-811618
Share on other sites

I have read in at least three places that there is meant to be a maintenance-free battery with a vent hole that allows a tube to be fitted to it... This tube leads outside the car.

I watched one of my father's friends disconnect a charger from a battery before turning off the power point, I then watched him fly 30 feet through the air before hitting a brick wall, the impact killing him.

I have always worried about hydrogen gasses building up in my boot, with all the audio amps in the boot and smoking in the back seat. Hasn't happened yet but I keep worrying!

Next battery I get will either have this vent tube, or be enclosed in a box that's forcibly ventilated.

Link to comment
https://www.sau.com.au/forums/topic/39738-odd-battery-fact/#findComment-814650
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...