Jump to content
SAU Community

Recommended Posts

hey guys im in the process of getting rear tyres at tha moment, i currntly have 225/50/16's on the rear and i have just put new potenza g3's 205/55/16's on the front (front rim is 7" wide)

my rear rim is 16x8" and i was thinking of going 245/45/16's rather then 225/50/16's i know they will fit just bulge slightly but my main concern is that there is a large discrepency between front and rear, what should i do, get 225's or 245's for the rear?

any pro's con's??? i have found a good 245/4516 tyre for the rear toyo proxes t1-s or falken grb fk451, 225's easy to find in any tyre!

thanks guys

no problem with different sizes front to rear except on a GTR, I run 235 front and 265 rear.

but, to me 205 for your fronts sounds very small?

I'd recommend the falken fk451s they are excellent

no problem with different sizes front to rear except on a GTR

I have never encountered a problem with different size tyres front and rear on GTR's, or GTS4's for that matter. Width is obviously irrelevant, the ATTESA doesn't know how wide the tyres are. As for diameter, that's a furphy, otherwise you would have to buy 4 new tyres everytime, because the diameter is around 16 mm different (8 mm of tread depth) between a new tyre and a worn out one.

An example;

Say you use a 225/45ZR17 on the front which is 635 mm in diameter when new

While you use a 255/40ZR17 on the rear which is 640 mm in diameter when new

The 5 mm difference is way less than the tread depth, so it would be the same as running new tyres on the front and half worn ones on the rear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...