Jump to content
SAU Community

Track Day - 6 May 2012 Midvale Speed Dome

Dr.J

By Dr.J,
in Events

 Share

Recommended Posts

Dr.J Enthusiast

Dr.J

Posted
Posted

I've organised a track day at the Midvale Speed Dome.

There are up to 20 places available, but I'm looking for 16 -17 drivers.

It will be a full day and will cost $160 including lunch.

It's a short course, so it suits small quick cars, but you can drive anything you like if you think it will be competitive.

It will be an Autokhana/Superkhana style event, which essentially means driving really fast around a series of tight corners and short straights.

It will be a FULL day event, but obviously you can come and go as you please.

You will need your own, or access to the following things;

Licenced & roadworthy car

Helmet

Long sleeve shirt and pants (cotton is best)

Closed in shoes

Your car will be lightly scrutineered before you are allowed to drive it on the track.

Basically, make sure the following things are done;

Battery is secure

Seatbelts lock under tension

Tyres are not completely bald

Loose objects are removed from cabin

Your car is not falling apart

Your car is not leaking vital fluids

Cost is $160 - payable before the day.

Price will include Hot Dogs and drinks for the drivers only.

Spectators are most welcome, but will need to provide their own food and drink.

You will need to bring your own;

Seats/blankets/cushions to sit on during the day.

Sunscreen, just in case

Insect repellent, just in case.

Don't forget your tools, and spares just in case!

There's plenty of room to make a mistake, so rest assured that the worst that will happen is your car might get a little dirty.

It'll be good fun, and it'll be at mostly slower speeds, so drive at the pace that you're most comfortable with. Your times will improve the more you drive.

There's a chance of some professional instruction on the day too.

The money is non-refundable, so if you can't make it, find someone else to take your place.

Make sure your car is reliable, and will last the whole day. The price is the same whether you drive for 1 run or 20.

You may drive someone else's car (with their permission of course!), but that car will need to scrutineered also if it hasn't been already.

Lastly, the track is for everyone who is driving on the day. Each run takes about 1 minute 30 seconds.

Don't dawdle, remember who you're after in the running order, and standstills are for Motorvation.

If you're deemed to be unsafe on the track, you get 1 warning only. After that, no more driving for you.

You will need to let me know via PM or e-mail, if you intend on driving ASAP so that I can advise and pay the venue, and sort out your running order for the day.

Contact me with any questions

Thanks icon_e_smile.gif

Dr.J Enthusiast

Dr.J

Posted
  • Author
Posted

For those who are considering driving in this, I already have over the required number of entrants, but not everyone has paid.

You will need to pay ASAP for this otherwise you may miss out.

I am now giving priority to those who have said they were coming first, but you have until 6pm this Wednesday (25th) to pay, otherwise I will offer your spot to someone else.

You may also bring me the money personally in Morley if you don't your payment will clear in time...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      ugently need expert / experienced opinion

      By Duncan · Posted

      Certainly. It is probably broken under the wire style clamp. At least that one is easier to get at than the front one.   Sounds like it isn't a major leak, I'd start with backing off the the water feed and return banjos into the turbos half a turn then tightening properly. Hardlines can still crack over time, either in the tube (particularly when turbos are changed if the banjo is siezed in the the tube) or at the brazed joins between the lines and the banjo fittings. A coolant system pressure test will reveal all. BTW you'd be able to get a sump without exchange, it will just cost more as they will have to source another stock one for the next customer. If you want to address the sump a much better option is something like this https://www.hioctanedirect.com/hi-octane-racing-sump-extension-nissan-rb26 that you weld in locally (and add the oil return fittings at the same time)
    • Duncan
      Fourth gear grind

      By Duncan · Posted

      Pretty sure you are thinking of the throwout bearing there (which you should change when you change your clutch), when they are worn they will get quieter if you put your foot on the clutch. An input shaft bearing is turning/noisy at all times.
    • GTR_JOEY
      Comfortable replacement seats for R32 GTR

      By GTR_JOEY · Posted

      I’ll have more of a look into Recaros over the weekend. It’s taken me 2 days to figure out which Bride seats suit my application haha.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I am aware of their presence, but the product page looked like that conversion will eliminate the AWD capability. Fact remains it's kind of a hassle to send my oil sump halfway around the world and buying an extra one is expensive and unnecessary. Before I go hat route I'd explore more local options.    Would you recommend I just pull the engine and renew as many things as possible since I'm already having problems with some leaks? Would have to get an engine crane first though.
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      Are there any indicators that the vehicle is in limp mode?  Any dash light, or something.  Or is it just lack of acceleration?
×
×
  • Create New...