Piglet's Rebuild Of His Busted Tomei 2.8

[Piggaz]

Update!

Fuel system is almost completed.

- Aftermarket Industries SP 1200 using 2 of the possible 3 Walbro 460's.

- Speedflow 200 series black braid hose. -10 all round with a -12 breather.

- Had a fuel hat spun up to accept the factory rubber.  (This is away getting machined up to accept the fittings ATM).

- Ethanol sensor in the return line which has a bypass around it. The by pass has a 1 or 2 psi one way valve in it to push as much fuel through the sensor.

- Hypertune rail which got annodised black.

- Bosch 1700 cc injectors.

- 3 X Fuelab 828 series (5 inch long element) fuel filters. 1 is a 40 Micron pre surge tank, the other 2 are 6 Micron in parallel post surge tank. 

Got the reground HKS V-Cam back. It started life as a 264 @ 8.7 mm. Duration at 50 thou was 222.xx. It's not a "270 ish" @ 10.25 mm. Duration at 50 thou is 229.54. The Unigroup "260" at 50 thou is 232.34, so a little more agro. That has 10.85 mm. The Base circle went from 32 to 30.1 mm on the modified V cam camshaft.

Unigroup cam left, V cam right.

Unigroup left, V cam right.

Unigroup left, V cam right. You can see the different sizes of the nose between them. Totally different, not to mention all the oil gallery machining going on in there.

 

[Leroy Peterson]

Geezus that's a lot of hose and fittings.

[Sub Boy32]

Sweet looking fuel setup.....as usual for you overkill is the name of the game!

this is going to be a very scary car when it hits the road!

[Piggaz]

50 minutes ago, Sub Boy32 said:

Sweet looking fuel setup.....as usual for you overkill is the name of the game!

this is going to be a very scary car when it hits the road!

Means I'll NEVER have to revisit it again. Done!

[Piggaz]

Double post

[Roy]

Yikes...i hated spending $1500 on my fuel system. So you got v-cam on thus truck now! Mega

[Nismo 3.2ish]

On 08/10/2016 at 6:51 AM, Piggaz said:

Means I'll NEVER have to revisit it again. Done!

Hahahahaha, we will see

[Sub Boy32]

Some finger from arse removal is required here.......

[Piggaz]

On 11/20/2016 at 7:39 AM, Sub Boy32 said:

Some finger from arse removal is required here.......

Can't get into Insight until Feburary.

Haven't spoken to Dennis this week. Hopefully the PS res, the airbox and gate lines are on the to do list.

Gearbox is back out of the car. I wish I knew this before I put the gearbox in, but for those who buy an OS88 in the future, make sure you sort out the breather fitting. They silicon the fitting in and with a little bit of heat the fitting pops out. It makes sense why it was spewing oil out on the dyno and on the road! Box is at Award getting sorted. So, a "cover" on the inside over the breather hole, a tapped thread for the breather fitting so it won't come out. Scott also wants to run a Mercedes Benz gear position sensor so that will go in now. GRRRRR!!!!!

Ross CAS kit was ordered last week.

Godzilla motorsport ignition kit ordered this arvo. Thats another two items off the list.

[Nismo 3.2ish]

37 minutes ago, Piggaz said:

Can't get into Insight until Feburary.

Haven't spoken to Dennis this week. Hopefully the PS res, the airbox and gate lines are on the to do list.

Gearbox is back out of the car. I wish I knew this before I put the gearbox in, but for those who buy an OS88 in the future, make sure you sort out the breather fitting. They silicon the fitting in and with a little bit of heat the fitting pops out. It makes sense why it was spewing oil out on the dyno and on the road! Box is at Award getting sorted. So, a "cover" on the inside over the breather hole, a tapped thread for the breather fitting so it won't come out. Scott also wants to run a Mercedes Benz gear position sensor so that will go in now. GRRRRR!!!!!

Ross CAS kit was ordered last week.

Godzilla motorsport ignition kit ordered this arvo. Thats another two items off the list.

It was easier to get to the moon

and quicker . lol

[usmair]

are you still going 8374 Paul (sorry havent kept up with thread)

[Piggaz]

6 minutes ago, usmair said:

are you still going 8374 Paul (sorry havent kept up with thread)

8374/1.05 is a goer!

[fatz]

Buy the time this car runs the turbo will be outdated

 

#skolaspec

[Piggaz]

30 minutes ago, fatz said:

Buy the time this car runs the turbo will be outdated

 

#skolaspec

Hardly in my control. If I could of had it back by now I would! 

[Nismo 3.2ish]

9 hours ago, fatz said:

Buy the time this car runs the turbo will be outdated

 

#skolaspec

It might be outdated already, 8474 lol

[Anfanee]

Do they do trade ins? lol

 

[reaper]

16 hours ago, fatz said:

Buy the time this car runs the turbo will be outdated

 

#skolaspec

I see what you did there 

Edited November 23, 2016 by reaper

[jade501]

Any updates?? Im also going efr8374 and emtron kv8 interested to see what the your results are

[r32-25t]

It fell off the back of a tow truck and is being repaired 

[Hadouken]

No way