Jump to content
SAU Community

Piglet's Rebuild Of His Busted Tomei 2.8

Piggaz
 Share

Recommended Posts

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted

Update!

Fuel system is almost completed.

- Aftermarket Industries SP 1200 using 2 of the possible 3 Walbro 460's.

- Speedflow 200 series black braid hose. -10 all round with a -12 breather.

- Had a fuel hat spun up to accept the factory rubber.  (This is away getting machined up to accept the fittings ATM).

- Ethanol sensor in the return line which has a bypass around it. The by pass has a 1 or 2 psi one way valve in it to push as much fuel through the sensor.

- Hypertune rail which got annodised black.

- Bosch 1700 cc injectors.

- 3 X Fuelab 828 series (5 inch long element) fuel filters. 1 is a 40 Micron pre surge tank, the other 2 are 6 Micron in parallel post surge tank. 

2CF376C8-F2E3-434C-9386-B6E1350FE8E3_zps

A6DDED2F-8525-4E93-A760-673303052EB7_zps

A9AD71BB-3BA7-45EE-A1FA-EC717370AF53_zps

026C0C1E-F8DC-4093-B6D3-13F391CF15F2_zps

7BF24C45-2074-4137-9343-EB7C5B230BC0_zps

Got the reground HKS V-Cam back. It started life as a 264 @ 8.7 mm. Duration at 50 thou was 222.xx. It's not a "270 ish" @ 10.25 mm. Duration at 50 thou is 229.54. The Unigroup "260" at 50 thou is 232.34, so a little more agro. That has 10.85 mm. The Base circle went from 32 to 30.1 mm on the modified V cam camshaft.

6C3C5B4F-3B3C-41BF-8285-BB6C554ED74D_zps

Unigroup cam left, V cam right.

ED49E84C-7B67-4B37-9C4E-E4AC5ADE3A2D_zps

Unigroup left, V cam right.

4193B74B-353B-4636-A911-3067EC1D2DA2_zps

Unigroup left, V cam right. You can see the different sizes of the nose between them. Totally different, not to mention all the oil gallery machining going on in there.

 

  • Like 3
  • Replies 3.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Piggaz
Piggaz

Car is finally booked into Insight on the 19th of April for the ECU, fuel system and sensor wire in plus the tune. Thats the good news. The bad news is that V-cam aint gonna fit with my pistons and ho

Piggaz
Piggaz

Small update.... ITS RUNNING. Fired first go! Smells like burnt dust apparently .

Piggaz
Piggaz

A 9174 would just make the EGP pressure issue worse and in my mind it seems like a bit of a GT RS shit going on. Not that it's horrendously bad (It wouldn't be no twin buttplug pressures), That's NOT

Posted Images

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted
50 minutes ago, Sub Boy32 said:

Sweet looking fuel setup.....as usual for you overkill is the name of the game!

this is going to be a very scary car when it hits the road!

Means I'll NEVER have to revisit it again. Done!

  • 1 month later...
Piggaz Grand Master

Piggaz

Posted
  • Author
Posted
On 11/20/2016 at 7:39 AM, Sub Boy32 said:

Some finger from arse removal is required here.......:bomb_ie:

Can't get into Insight until Feburary.

Haven't spoken to Dennis this week. Hopefully the PS res, the airbox and gate lines are on the to do list.

Gearbox is back out of the car. I wish I knew this before I put the gearbox in, but for those who buy an OS88 in the future, make sure you sort out the breather fitting. They silicon the fitting in and with a little bit of heat the fitting pops out. It makes sense why it was spewing oil out on the dyno and on the road! Box is at Award getting sorted. So, a "cover" on the inside over the breather hole, a tapped thread for the breather fitting so it won't come out. Scott also wants to run a Mercedes Benz gear position sensor so that will go in now. GRRRRR!!!!!

Ross CAS kit was ordered last week.

Godzilla motorsport ignition kit ordered this arvo. Thats another two items off the list.

  • Like 1
Nismo 3.2ish Grand Master

Nismo 3.2ish

Posted
Posted
37 minutes ago, Piggaz said:

Can't get into Insight until Feburary.

Haven't spoken to Dennis this week. Hopefully the PS res, the airbox and gate lines are on the to do list.

Gearbox is back out of the car. I wish I knew this before I put the gearbox in, but for those who buy an OS88 in the future, make sure you sort out the breather fitting. They silicon the fitting in and with a little bit of heat the fitting pops out. It makes sense why it was spewing oil out on the dyno and on the road! Box is at Award getting sorted. So, a "cover" on the inside over the breather hole, a tapped thread for the breather fitting so it won't come out. Scott also wants to run a Mercedes Benz gear position sensor so that will go in now. GRRRRR!!!!!

Ross CAS kit was ordered last week.

Godzilla motorsport ignition kit ordered this arvo. Thats another two items off the list.

It was easier to get to the moon :)

and quicker . lol

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted
30 minutes ago, fatz said:

Buy the time this car runs the turbo will be outdated

 

#skolaspec

Hardly in my control. If I could of had it back by now I would! :mad:

reaper Experienced

reaper

Posted
Posted (edited)
16 hours ago, fatz said:

Buy the time this car runs the turbo will be outdated

 

#skolaspec

I see what you did there :D

Edited by reaper
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      NC MX5

      By r32-25t · Posted

      Do you plan on using 98 or e85?
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      This should be pretty easy. 200rwkW is just about the max power out of an RB25 stock turbo. So, 12ish psi on a 2.5L. That boost limited mainly by the prospect of seeing the turbine in the cat after the smoke show. A steel wheeled equivalent would likely happily do ~220rwkW at something like 17 psi, where it would probably be bumping into the usual limits of such a sized turbo. These things have like a .48 rear. You will not need the 0.86 rear. The 0.64 will be fine. In fact, if you were looking at various mid-200rwkW options for RBs, most of them would be in a 0.64 rear. So, I think you will definitely want to be no bigger than that for a same sized but probably even more efficient (at making power) modern engine.
    • Dose Pipe Sutututu
      Shoota's R33 GT-R RB30/26

      By Dose Pipe Sutututu · Posted

      Change the subframe bushes, transforms the car.
    • Rezz
      Video Edit Programs

      By Rezz · Posted

      For something a little more serious, Davinci Resolve is about the best there is for free video editors. No expiration dates or watermarks, completely free.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Well, it's taken me until the last week of 2024 to actually do something on the Skyline but I consider it a good head start to 2025's efforts! I managed to justify (to myself anyway...) my purchase of the lift table. It made taking the rear subframe out a lot easier than it would have been without anyway! Everything is out and stripped down ready for a clean then powdercoating.  She's pretty grubby under there but pretty good condition for a 38 year old Japanese tin bucket. 12 years of zero street time have obviously helped that... I need to decide which of the factory suspension arms I will keep and replace so I only get what I'm keeping powdercoated.  Baby steps but it's a start!  
×
×
  • Create New...