Jump to content
SAU Community

Recommended Posts

7 minutes ago, ActionDan said:

But.. how can we agree on something? I run a Haltech that fits into my kick panel. 

#theshame

No Peter loves living dangerously like you and runs a haltech without a crank trigger.

2 minutes ago, ActionDan said:

You should get Emtron, it will double your power instantly.

Don't be silly, you know that any ECU can make power, its how it behaves everyday and weather it delivers on the features it's marketed with.

 

Anyway looks like Piggaz cheaped out and bought a knock off Motec m150.... 

 

M150.thumb.jpg.db4a8e5d001f3ce14e0d0c42aad2d99a.jpg

So somehow the ECU is the issue, not the old CAS, and moving to a superior crank trigger setup is the fix, but we blame the ECU?

Sounds backwards?

Wait? I've got it! Its because the signal has to travel through so many boxes and so many wires!

Just now, ActionDan said:

So somehow the ECU is the issue, not the old CAS, and moving to a superior crank trigger setup is the fix, but we blame the ECU?

Sounds backwards?

Wait? I've got it! Its because the signal has to travel through so many boxes and so many wires!

See now you are starting to get it...

 

The old powerFC, Nistune and adaptronic don't suffer from issues... unless of course the loom is cooked or the CAS is actually faulty..

See now you are starting to get it...
 
The old powerFC, Nistune and adaptronic don't suffer from issues... unless of course the loom is cooked or the CAS is actually faulty..

I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?
1 minute ago, ActionDan said:


I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?

They are actually, but let's not get the facts in the way of things. As long as you are happy with your car that's all that matters!

4 minutes ago, ActionDan said:


I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?

Lol if your in vic go for a drive in Andrews car

next day you will rip out haltech and put a power fc in and have a retune with the bloke who sorts his car

100% garentee that

 

2 hours ago, ActionDan said:

How much better is your car to drive now you've switched from Haltech to Emtron anyway, must have been a massive improvement? 

Bit weird Mick, you thought the Haltech was decent a few months ago? What happened? 

"Hey guys up for grabs is a Haltech elite 2500 with a patch loom by haltech to suit an R34 GTR. ECU has only been in the car for around 10000km max im sure anybody shopping around knows the capabilities of this top of the line ECU. $2800ono"

I guess top of line doesn't actually mean it's any good I suppose. Soi I reckon the improvement must be massive and dyno proven with no other changes to skew results... 

 

Lol i sold that POS on behalf of a friend. I never thought it was good as it never remembered the tune properly mate.

Sadly that wasn't a bad thing because the tune was as bad as the ECU ?

I wasn't going to offer my ACTUAL opinion on that when i was trying to sell it haha ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...