Jump to content
SAU Community

Recommended Posts

ported stock manifold $800... 6boost $1200.. i know which one i would go.

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

Hey trent. Already got it done! Results are on 1st page. Thoughts?

Me thinks you go back to Status and it'll make the same power.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

Have you had the manifold independantly flow tested?

Those gains in flow seem huge

Im thinking the power gains are real, but im not so sure about the 50% increase in flow

If you think about it 50 cfm to 100cfm is 100% gain. So 160cfm tested on a flow bench to 240cfm is only a gain of 80cfm. 50‰ sounds huge. But the starting number wasn't the highest to begin with as the stock Mani flows like crap.

This is a reputable mob so I can only assume he's not speaking crap. Jjm would tear him a new one if the numbers were fudged. They've been dealing with this guy for years.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

Lol. Might be worth it just for giggles. U still in same place?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Nah new shop is nearly finished.

429517_3152457364010_1042410610_33058136_1201205526_n.jpg

Now no more complaints from neighbours hey?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Yeah I knew the basics. But thanks for info on how bad the chatter could be. 1.5 might be the go.

Edited by ShiftyTys

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

what was the biggest thing you noticed

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

They are the same people. Name change. Jjm are avo. So I still trust them.

Car made initially:

285rwkw @ Avo turboworld

250rwkw @ jjm turboworld.

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

The owner and the name and the dyno of avo are no more. Avo is now just selling avo branded parts. The tuner mechanics etc got their own dyno and.are now jjm.

So 35rwkw on 2 different dynos is easy done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...