Jump to content
SAU Community

Recommended Posts

ported stock manifold $800... 6boost $1200.. i know which one i would go.

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

Hey trent. Already got it done! Results are on 1st page. Thoughts?

Me thinks you go back to Status and it'll make the same power.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

Have you had the manifold independantly flow tested?

Those gains in flow seem huge

Im thinking the power gains are real, but im not so sure about the 50% increase in flow

If you think about it 50 cfm to 100cfm is 100% gain. So 160cfm tested on a flow bench to 240cfm is only a gain of 80cfm. 50‰ sounds huge. But the starting number wasn't the highest to begin with as the stock Mani flows like crap.

This is a reputable mob so I can only assume he's not speaking crap. Jjm would tear him a new one if the numbers were fudged. They've been dealing with this guy for years.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

Lol. Might be worth it just for giggles. U still in same place?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Nah new shop is nearly finished.

429517_3152457364010_1042410610_33058136_1201205526_n.jpg

Now no more complaints from neighbours hey?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Yeah I knew the basics. But thanks for info on how bad the chatter could be. 1.5 might be the go.

Edited by ShiftyTys

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

what was the biggest thing you noticed

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

They are the same people. Name change. Jjm are avo. So I still trust them.

Car made initially:

285rwkw @ Avo turboworld

250rwkw @ jjm turboworld.

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

The owner and the name and the dyno of avo are no more. Avo is now just selling avo branded parts. The tuner mechanics etc got their own dyno and.are now jjm.

So 35rwkw on 2 different dynos is easy done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • looking forward to your t56 swap man its a game changer if it works! 
    • So, when are you trying the new GR86 or BRZ?
    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
×
×
  • Create New...