Jump to content
SAU Community

Changing Fan On Gtr To Thermo Fans?

wingnut999

By wingnut999,
in Engines & Forced Induction

 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Thermo's rob power from the engine too, they are less efficient than the engine fan and suck a heap of current from the alternator whenever they are on.

If you set them at a high enough temperature so they barely come on you may be better off, that's my plan. One small thermo and one large one set at different temps may help too.

blind_elk Grand Master

blind_elk

Posted
Posted
If you set them at a high enough temperature so they barely come on you may be better off,
That's how the are supposed to be set up. But very few actually set them up this way. Many set them so they are permanently on, which totally defeats the purpose - all that does is shift the load on the engine from the fan to the alternator.

The problem I had when I tried it (32 GTS4), was getting air to flow through the radiator while the car was moving. I could only JUST get airflow, and the slightest uphill in the road coud induce the fan to activate.

For the few kW gained by removing the load of the fan, it is not worth cooking an engine.

GTRsean Grand Master

GTRsean

Posted
Posted

Well those cars were designed by the manufacturer to use thermos as standard.

A working clutch fan such as the nissans will only draw engine power when at idle or just above, as they are supposed to taper off/decouple as RPM increases.

As they wear out they tend to stay engaged longer and start to sound like an EA falcooon.

51NNA Community Regular

51NNA

Posted
Posted (edited)

When they wear out they stop working i.e you can hold the fan while revving the engine when hot, the viscosity in the gel changes and with the correct type of battery the thermo wont put strain on the alt.

Edited by 51NNA
abr33 Proficient

abr33

Posted
Posted

and with the correct type of battery the thermo wont put strain on the alt.

I beg to differ, it dont matter if your running an n70z or a ride on mower battery if your fan draws 30 amps your alternator needs to make 30 amps, it does however stop the alternator spiking as such.. Unless thats what you meant?

gotRICE? Veteran

gotRICE?

Posted
Posted

So all the WRX's and many other cars that come from the factory with a thermo fan are going too cook there engines? lol...

You ever driven a Falcon? lol

A clutch fan on an E/W mounted engine wouldnt do much cooling now would it?

51NNA Community Regular

51NNA

Posted
Posted

I beg to differ, it dont matter if your running an n70z or a ride on mower battery if your fan draws 30 amps your alternator needs to make 30 amps, it does however stop the alternator spiking as such.. Unless thats what you meant?

Yes, i didnt mean the battery will stop the current draw, but with the correct battery the load would be reduced on the alt, unless the thermos constantly on.

You ever driven a Falcon? lol

A clutch fan on an E/W mounted engine wouldnt do much cooling now would it?

...were did i say "put a clutch fan on a wrx" All im saying is MOST cars come with thermos with no cooling issues and yes ive driven a falcon and worked on 100s, whats that got to do with anything?

abr33 Proficient

abr33

Posted
Posted

On this topic, is there anywhere to but new clutch and fan for rb25? nissan want 750 for it and im not spending that much ill go second hand first, my plastic fan has cracks and the clutch holds the fan on permanently and certainly makes some noise at 8000 revs :-/

Simon-S14 Grand Master

Simon-S14

Posted
Posted

On this topic, is there anywhere to but new clutch and fan for rb25? nissan want 750 for it and im not spending that much ill go second hand first, my plastic fan has cracks and the clutch holds the fan on permanently and certainly makes some noise at 8000 revs :-/

Garage 7 sell both the fans and the hubs at a much more reasonable price then that

www.garage7.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Bonnet clearance?
    • joshuaho96
      Magnetic Drain Plug Snapped in Half

      By joshuaho96 · Posted

      On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
    • GTSBoy
      Finding E-30 & E-85 in Sydney

      By GTSBoy · Posted

      This seems like a pointless exercise. There is no E30 availability. Ongoing availability of E85 should not be assumed. Flex-fuel is the only sensible approach, so you can use E85 when and where you can get it, 98 when that's al you can get, and anything in between as you fill it up and drain it down. And if that means replacing the pumps, fitting a flex capable sensor/ECU/whatever has to be done to these Renault shitboxen, then.....so be it?
×
×
  • Create New...