Jump to content
SAU Community

Recommended Posts

Are neons illegal?

If they are in the front grill (the globe isnt showing), and its red?

i heard from somewhere that red is illegal, but green n blue arent?

can anyone help me with this

thanks

ps, if you are going to say neons are shit, dun post, I cant be bother reading it..

when mine were... um - inspected, nothing was said about the colour, just no flashing, and make sure the globe can't be seen.

Ive tried driving around with all three colours at one time or another, and so far no sticker ! so im guesing they're ok...

also ref. this thread... http://www.skylinesaustralia.com/forums/sh...ead.php?t=38868

hope this clears things up

Phil

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-812783
Share on other sites

Are neons illegal?

If they are in the front grill (the globe isnt showing), and its red?

i heard from somewhere that red is illegal, but green n blue arent?

can anyone help me with this

thanks

ps, if you are going to say neons are shit, dun post, I cant be bother reading it..

I've recently been involved in a yellow sticker incident involving neons, so I can quote first hand what is and isn't allowed.

The law according to a Dept of Transport vehicle inspector:

Neons are legal under the following conditions,

You must not be able to see the elements from a seated position in an ajacent vehicle, neons are not allowed to pulse or flash, you must not have a red neon facing forward, all other colors are acceptable, all colors including red are acceptable for the sides and rear, they must be adequatly secured and the elements shielded to avoid exposure to other drivers. You can drive around with them on.

The law according to some cops:

Yellow sticker every vehicle with neons as they are deemed a distraction to other drivers, you can't have them on whilst driving but static in a carpark is OK.

My personal suggestion is put em on the correct way, use them and know the law and your rights if you get pulled over, just remember though it could cause the cops to look for other defects on your car so keep it neat and legal.

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-813144
Share on other sites

no good comes from them....

you get more "rice boy" shit from trevs

more attention from cops

if your car is stock and you have neons thats just stupid

if your car is bombed, looks like the 2 fast 2 furious car (like danny's :D) then its ok because he is riced up on every other angle so the neons dont look outa place. :rofl:

all i can suggest is dont turn them on or off infront of a cop

because then they will say they are flashing, and if you are turning them off then the cops will think your guilty of something and pull you over... :(

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-813352
Share on other sites

ok, cos ive got a couple of blue ones like under the dash, on either side and i got a red one, in the front grill...u cant see the globe only the red light as you could say...so yer, hopefully, i wont be braggin over it, like hsowing them left right n centre, but the occasional should be ok..

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-813611
Share on other sites

no good comes from them....  

you get more "rice boy" shit from trevs

more attention from cops

if your car is stock and you have neons thats just stupid

if your car is bombed, looks like the 2 fast 2 furious car (like danny's ;)) then its ok because he is riced up on every other angle so the neons dont look outa place. :)

 

all i can suggest is dont turn them on or off infront of a cop

because then they will say they are flashing, and if you are turning them off then the cops will think your guilty of something and pull you over... :rofl:

funny thing is i see more commodores falcons and other trev crap with neons on them than jap cars so i dont know how they think WE are 'rice'

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-814667
Share on other sites

thats true. have seen plenty of commodores with cheap and nasty neon installs.  

 

:vomit:

I find this to be true also... and the ONLY thing worse than a cheap and crappy install is cheap and crappy neons - if they are so dull you can only see them when parked in the dark, why bother?

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-818632
Share on other sites

BASSULA - Nice Work mate !! :D

looked at the iceled kits when i was buying, but they were just a little out of my range :(

Ended up with liteglo... only 8 colours, 1 at a time or cycling, but thinking of writing my own ROM for it...

for now though... :D ICELED

btw, Ill be up in the capital sometime in June - Should go cruisin...

Cheers,

Phil

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-823593
Share on other sites

thnx phil,

If you want a in the flesh demo of the ICELED kit drop me a pm/e-mail when you are in perth. always willing to show it off a bit.. :D show ya that its not just a underbody kit.. :D

cheers

i might just do that... im a sucker for the *bling*... where'd you source them, if you don't mind me askin' ? was it a private import job, or does someone actually stock those things?

Link to comment
https://www.sau.com.au/forums/topic/39795-neons/#findComment-823620
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...