Jump to content
SAU Community

Gtr 34 Rear Diffuser's

Rizzz
 Share

Recommended Posts

Rizzz Community Regular

Rizzz

Posted
Posted

Hi Everyone. :action-smiley-069:

Just wondering if their is any interest for Custom Aluminium rear diffusers for r34 GTRs.

I've gone through the whole process as im sure many of you have.

I have looked everywhere yahoo auction on SAU and can find any OEM rear Diffusers they're either to expensive 2k+ or they have been scooped up by a lucky member that was first in line.

So ive decided to make my own Rear diffuser out of aluminium. The Material thickness will be 2.5mm thick and the plastic fins will also re-made and replaced as alunium units.

The whole unit will be laser cut and hopefully be the same weight as the OEM one. Ive done away with the centre scoop as the wing provides enough down force and im hoping to achieve better air flow under the vehicle.

Ill be posting pics in a few days of the final Result :no:

Ross

Link to comment
https://www.sau.com.au/forums/topic/398064-gtr-34-rear-diffusers/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yea the photos aren't the best. When I was pulling the bumper and headlights out there was a bodyshop guy looking on for it, there is a slight bend behind where the passenger headlight is, but we're talking a few MM and there is a little bit of a bend for the reo. That said it's supposedly well within the "Drill a hole in it and pull it out with a slide hammer to be close enough" and be on our way. The other option is to buy a GTR reo for the GTR bumper bits but this is a $2000+ fix for something Mr Hammer can probably do 99% of the job for and everything will/can line up pretty closely-to-good-enough.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      That's a write off for sure... Part out? 😛 I kid. It looks like the rad support has a minor minor bend in it too where the rep support sits near. Could just be the photos (and me not wearing my glasses right now). Worst case is you can buy a new radiator support, have it swapped over, and leave the car in paint jail for 12 to 18 months while you build the motor to handle twin turbos or a Harrop SC...
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      It seems the definition of "Gregging" something might need to be expanded?
    • GTSBoy
      R32 GTR - Where to begin

      By GTSBoy · Posted

      This is why I suggested that there is really nothing that can safely be done in the engine bay at this budget level. Just the work to reassure yourself that the engine won't instantly crap itself the moment the boost gets turned up will wear out the piggy bank long before the first turbo gets installed. Spend $10k and still not have any extra performance? My tip is a version of our standard advice from 15 years ago about buying a GTR, which is not to buy one unless you can afford to buy two. The new version is not to modify a GTR unless you have all the funds required to do it all at once, properly, and enough to rebuild it after it blows up.
    • Murray_Calavera
      R32 GTR - Where to begin

      By Murray_Calavera · Posted

      Oh, I forgot to mention this before.  It is accepted that your taking on risk buy turning up the power on a 30 year old stock motor. You can lower the risk with the ECU engine protection, but this is more money on sensors. CAN wideband, oil temp, oil pressure, coolant pressure, fuel pressure, air temp, etc. It adds up quick.  I am a huge fan of running all of the engine protection the ECU offers. You'll have to decide for yourself how you want the engine protection setup and what you think is worth monitoring. 
×
×
  • Create New...