Jump to content
SAU Community

Recommended Posts

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1900

with Tomei Poncams

(without injectors/ecu/plennum/turbo)

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

OS Twin Plate Clutch (good condition) - $800

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

HKS Exhaust Manifold (Stainless steel) - $600

Oil Cooler with Relocation kit - $600

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

2 Layer Radiator - $200

Aluminium Radiator -$200

R32 GTR Intercooler with Piping - $400

Front mount inercooler with Piping - $250

Greddy Plennum - $900

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

Lightened Flywheel - $200

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC w/ Controller - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

298437_10150351333548744_733698743_8166504_1946911072_n.jpg

If there's any cool/rare stuff on the laurel shells I'd be interested.

hey mate, there's a bunch of laurel shit coming back, there will be a thread up about that soon, but not 100% sure what's left on it after i got my mate to take a bunch of stuff off before it was sent over for my laurel over there.

awesome, i'm chasing anything thats hard to get over here, front lip, centre console with cupholders,weathershields anything little like that.

Venetians? hahaa

haha i have weathershields on my C33 streeter in Japan, but not sure if i have any coming back, cupholders ill check.

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1900

with Tomei Poncams

(without injectors/ecu/plennum/turbo)

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

OS Twin Plate Clutch (good condition) - $800

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

HKS Exhaust Manifold (Stainless steel) - $600

Oil Cooler with Relocation kit - $600

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

2 Layer Radiator - $200

Aluminium Radiator -$200

R32 GTR Intercooler with Piping - $400

Front mount inercooler with Piping - $250

Greddy Plennum - $900

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

Lightened Flywheel - $200

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC w/ Controller - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

298437_10150351333548744_733698743_8166504_1946911072_n.jpg

I was wondering if you had a throttle body to suit my 97 R33 gtst S2?

Do I see r33 gtst coilovers

not sure where dude? the ones in the pic are S14 as you can see by the 3 stud pattern and camber tops, not sure if you mean something else?

Hi there. With regards to the OS clutch, is it a push or pull type? I have a 2WD R33 with a push type clutch and am needing a multiple plate unit due to the power output. Can you please include some pics with the plate wear, heat spots & any other issues. Also - any idea on postage to QLD mid coast?

  • 2 weeks later...
  • 2 months later...

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

Oil Cooler with Relocation kit - $500

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

TRUST Intercooler core (rough condition, but works fine) - $200

Front mount inercooler with Piping - $250

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah so N1 and any other larger than factory pump are pretty famous for pumping the sump dry...obviously we don't often get to spend 20 or 30 seconds at high rpm/full noise on the road so I'd still be suspicious that is what is happening here.
    • You are also getting pressure dips on gear shifts. They're just not dipping as far, but they're dipping quite below the amount of oil pressure you should be seeing, for how much RPM drops.   It quite little could be the oil pressure relief valve is starting to stick open a little/is slow to close.
    • Can you log battery voltage, and TPS, and put all four of those into a single image (even as split graphs)?   The oil pressure drops aren't following RPM as such. I'm intrigued if you may have a ground loop between different sensors. With the engine not running, log your sensors and for example cycle the throttle pedal. See if any sensor values flutter or move about. This won't be a perfect test either as the ECU won't be cycling all of its actuators like it would be while running. What EMTRON do you have? Do you have a link to the wiring guide for that ECU?
    • What logic functions do you feel are missing from the Haltech that others have? Is there a limit to how much logic you can string together? By limit, I mean it's like only a single level or two levels of Boolean logic. Realistically, AND, OR, and NOT, is really the only logic you need and realistically, you can also do away with another logic gate of the three above . With those three you can build the full functionality of any Boolean logic you want.
    • Well that rules out the relocation theory, however with no load, you're still getting 1.5bar of oil pressure. Can you present that data in a scatter graph over longer period? Would really highly the anomalies. Wish Haltech could do that.
×
×
  • Create New...