Jump to content
SAU Community

Recommended Posts

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1900

with Tomei Poncams

(without injectors/ecu/plennum/turbo)

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

OS Twin Plate Clutch (good condition) - $800

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

HKS Exhaust Manifold (Stainless steel) - $600

Oil Cooler with Relocation kit - $600

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

2 Layer Radiator - $200

Aluminium Radiator -$200

R32 GTR Intercooler with Piping - $400

Front mount inercooler with Piping - $250

Greddy Plennum - $900

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

Lightened Flywheel - $200

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC w/ Controller - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

298437_10150351333548744_733698743_8166504_1946911072_n.jpg

If there's any cool/rare stuff on the laurel shells I'd be interested.

hey mate, there's a bunch of laurel shit coming back, there will be a thread up about that soon, but not 100% sure what's left on it after i got my mate to take a bunch of stuff off before it was sent over for my laurel over there.

awesome, i'm chasing anything thats hard to get over here, front lip, centre console with cupholders,weathershields anything little like that.

Venetians? hahaa

haha i have weathershields on my C33 streeter in Japan, but not sure if i have any coming back, cupholders ill check.

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1900

with Tomei Poncams

(without injectors/ecu/plennum/turbo)

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

OS Twin Plate Clutch (good condition) - $800

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

HKS Exhaust Manifold (Stainless steel) - $600

Oil Cooler with Relocation kit - $600

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

2 Layer Radiator - $200

Aluminium Radiator -$200

R32 GTR Intercooler with Piping - $400

Front mount inercooler with Piping - $250

Greddy Plennum - $900

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

Lightened Flywheel - $200

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC w/ Controller - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

298437_10150351333548744_733698743_8166504_1946911072_n.jpg

I was wondering if you had a throttle body to suit my 97 R33 gtst S2?

Do I see r33 gtst coilovers

not sure where dude? the ones in the pic are S14 as you can see by the 3 stud pattern and camber tops, not sure if you mean something else?

Hi there. With regards to the OS clutch, is it a push or pull type? I have a 2WD R33 with a push type clutch and am needing a multiple plate unit due to the power output. Can you please include some pics with the plate wear, heat spots & any other issues. Also - any idea on postage to QLD mid coast?

  • 2 weeks later...
  • 2 months later...

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

Oil Cooler with Relocation kit - $500

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

TRUST Intercooler core (rough condition, but works fine) - $200

Front mount inercooler with Piping - $250

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I have replaced everything on my r34 including suspension to Miester R, all rear subframe bushes to poly, all arms to metal adjustable and same in front.   only thing I haven't touched is the front lower control arm. Should I? what improvement can i expect ? I mean the one on the link below?   Car drives perfectly, it is just me thinking everything is either puly bush or hard bearing type so should also do lower control arm front but do I really need it ? https://www.japspeed.co.uk/product/suspension/adjustable-arms/nissan-200sx-s13-s14-s15-skyline-r32-r33-r34-adjustable-suspension-front-lower-control-arms/?gad_source=1&gclid=Cj0KCQiAo5u6BhDJARIsAAVoDWs5V_PauQPf0kx3zFCaA4tOC9Q7JSIsfJWma_jAPN2f1sJA686djOwaAidgEALw_wcB
    • Thanks for the link.....but I'm still not totally understanding (a bit slow). So as long as the host unit supports carplay or android auto, you plug the unit to a USB C port, and then change the AV source?  Does the unit run its own apps (eg I could run Real Dash or Torque etc) or does it rely on a host phone and just run Android Auto from the phone (which is very limited compared to full Android?). And, does the touch screen work for the apps? Only the bottom screen or the top screen as well? The 4g wifi looks like a good feature if you have kids with devices in the car (noting none of the versions seem to support 700mhz Telstra)
    • Mate, if Australian build quality was an eye opener, wait until you try a Chrysler. If you need space and fuel economy (and you don't want to hit the track) a fuga hybrid is the way to go. Similar power to the 400r (270kw), roomy, comfortable, good on fuel, great build quality
    • Um...that thing looks terrible. I'd be looking for replacements tout de suite. WTF is it made of? Die cast cardboard?
×
×
  • Create New...