Jump to content
SAU Community

Garage Cleanout R32 Gtr Leftover Parts And R31 Headlights


trustr32
 Share

Recommended Posts

Well I've finally finished putting my GTR back together and gave the shed a cleanout the other day and it's time to get rid of the leftovers mostly standard parts I've replaced with aftermarket items but a few aftermarket bits that came on the car.

Nismo Gmax twin plate clutch pull type. Came with the car I didn't get enough time in the car to really test it out but it didn't seem to slip depending on how much you enjoy pulling out gearboxes I'd probably recommend a rebuild.

post-58307-0-54349600-1334829832_thumb.jpg post-58307-0-17991400-1334830557_thumb.jpg$300

Standard manifolds and dumps

post-58307-0-77605200-1334828618_thumb.jpg$40

Standard cam gears

post-58307-0-30934100-1334828728_thumb.jpg$40

Standard computer with chip I only know this cause I removed the cover and had a look. It has a cradle soldered in with a chip in it. Not sure of what it's got on the chip but the car went unusually hard before I took it off the road.

$120

Short shifter

post-58307-0-88279800-1334828580_thumb.jpg$50

Pod filters with elbows

post-58307-0-85566200-1334828680_thumb.jpg$75

R34 GTR Vspec2 Turbos I bought these off a member on here 2 years ago fitted them and drove the car for 3 days they had done 62,000kms when I bought them. They have .48 rears and .53 fronts and are ceramic wheels as far as I know. I have the serial numbers if anyone wants more info.

post-58307-0-85893200-1334828637_thumb.jpg$300

R32 GTR turbo x1 One of the old ones off the car when I bought it not sure of kms. .48 rear .42 front

post-58307-0-30295400-1334828662_thumb.jpg$50

Full aircon setup for GTR everything from the firewall forward inc pump/condenser etc might even have belt

$120

GTR injector resistor module I have cut the plug off of this but the wiring is straight forward 1 white wire 6 black

post-58307-0-66249800-1334828753_thumb.jpgOffers

Full set of stock GTR intake pipes inc the 2into1 blowoff valve return pipe

post-58307-0-83745000-1334829727_thumb.jpgOffers

Replacement coil pack plugs x4 I needed 2 had to buy 6

post-58307-0-62883000-1334830066_thumb.jpg$25

Stock thermo fan

post-58307-0-11145300-1334829748_thumb.jpgOffers

Stock boost control solenoid

post-58307-0-32367400-1334830082_thumb.jpgOffers

R31 series 3 headlights perfect condition

post-58307-0-28823900-1334828600_thumb.jpg$100

Jap spec yellow projector spotlights

post-58307-0-95503700-1334828706_thumb.jpg$40

Stickers 2x small 1xmed 1xlarge

post-58307-0-28572100-1334829678_thumb.jpg post-58307-0-14063200-1334829712_thumb.jpgOffers

Gearstick boot

post-58307-0-19460500-1334829792_thumb.jpgOffers

Speco 7mm slip on wheel spacers

post-58307-0-95115000-1334829812_thumb.jpgOffers

S13 adjustable camber tops Brand new I'll post pics tomorrow<p>$10

Edited by trustr32
Link to comment
Share on other sites

S13 adjustable camber tops Brand new I'll post pics tomorrow<p>$100

Hey pipster sorry about that but I have obviously missed a 0 when I edited the post they're supposed to be $100 It has also deleted my mobile number so if anyone wants to txt me it's 0419176656 I'll get those pics up this arvo.

Link to comment
Share on other sites

Pipster they fit the 31 strut tower but the threaded sleeves/ nuts they come with don't fit the thread on the top of the shocks. Well they didn't fit Monroe gt shocks anyway ji was going to get different ones machined but I sold the car before I got round to it. Sorry I've been slack I'll put pics tomorrow.

Hi stuart sorry I spent the day down home today and I get stuff all reception I'm headed to Kingston in the morning so I'll give you a call then.

Justin I bought them off eBay $50 a set with all the new metal plugs grommets and the actual plug housings.

Link to comment
Share on other sites

Hey lad's some pictures I have been meaning to put up for a few days now.

Afew things are on hold for a few people and the short shifter is already sold to NISSANGTS

Stock intercooler pipes, A/C setup, stock mani's and pods with adapter elbows are on hold for jangles

S13 camber tops are on hold for pipster

Here's pics of the intercooler pipes layed out.

post-58307-0-07894900-1335083258_thumb.jpg post-58307-0-17936600-1335083299_thumb.jpg post-58307-0-77392300-1335083335_thumb.jpg

Pic's of the camber tops

post-58307-0-69153900-1335083580_thumb.jpg

And pics of the R32 GTR ecu it also has a link cable thats been put into it at some stage not sure what it's for exactly but it's got a jap sticker on it.

post-58307-0-09928100-1335083422_thumb.jpg post-58307-0-24061500-1335083463_thumb.jpg post-58307-0-06611200-1335083506_thumb.jpg post-58307-0-19617100-1335083548_thumb.jpg

A/c setup found out today that I must have ditched the 2 lines that run from the firewall to the condensor unit so looking for $90 now

post-58307-0-18210400-1335083370_thumb.jpg

Link to comment
Share on other sites

  • 1 month later...

still got stuff left over mate?

interested in short shifter (if not sold)

the GTR injector resistor module

and possibly the R34 GTR Vspec2 Turbos and coil pack plugs.

contact me on 0477934063, cheers

Link to comment
Share on other sites

Hi mate,

Is the R32 GTR ECU stock (other than the link cable), and you know its working? Also how much?

I'm looking for one to put a nistune board in.

Cheers.

And pics of the R32 GTR ecu it also has a link cable thats been put into it at some stage not sure what it's for exactly but it's got a jap sticker on it.

post-58307-0-09928100-1335083422_thumb.jpg post-58307-0-24061500-1335083463_thumb.jpg post-58307-0-06611200-1335083506_thumb.jpg post-58307-0-19617100-1335083548_thumb.jpg

Link to comment
Share on other sites

Na man it's got a cradle soldered in and I'm pretty sure it's an aftermarket chip in it. Came out of the car when it was running and went rather hard so not sure whats on the chip. Wanted $120 for it.

Link to comment
Share on other sites

Na man it's got a cradle soldered in and I'm pretty sure it's an aftermarket chip in it. Came out of the car when it was running and went rather hard so not sure whats on the chip. Wanted $120 for it.

Cheers for the info (sorry I missed the text in your first post without the ecu pics).

Sounds like a good ecu but probably not worth cannibalising it for a nistune mod. Thanks anyway.

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...