Jump to content
SAU Community

Leaving Feedback

sydking
 Share

Recommended Posts

Got a Pulsar Grand Master

Got a Pulsar

Posted
Posted (edited)

Not sure if this has been covered but when you leave feedback for someone in their profile, it used to be optional as to whether you wanted to include a link to the topic/deal but now it is a mandatory field and it won't let you leave feedback if you don't fill it in. I got a PM in regards to a wanted add so there isn't really a thread to link to.

When leaving feedback for a member, you are now required to complete the - Deal Topic (A link to the topic where the deal took place) - field.

It use to be optional before, which I think was better. Sometimes the url is not relevant.

Also... when you click on an attached image in someone's post, it opens in the same window. I hate that!, Should open in a new window, as per before.

Trying to leave some buyer feed back.

Keeps poping up saying i have left a field out,

Usually dont have to add where the sale took place, Though even adding that it still wont process?

Cheers

I have successfully left feedback since the update but it is a PITA as you have to find the thread in

question, as in, the wanted add or for sale add where the deal took place, copy the address, then

paste it in the field to leave your feedback.

It is doable but is a hassle compared to the old way.

Edited by Not a Pulsar
sydking Veteran

sydking

Posted
  • Author
Posted

hmm, Deal took place Via a Personal Message......so can i link that?

I understand the reason behind it, See how i go.

Few bag eggs ruin it for all the people trying to do the right thing, Met some very hosnet people on here. So it would be a shame not to leave good feedback for people who deserve it.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

You cannot link a personal message.

Feedback system is ONLY designed to be used with For Sale ad's as described above.

It used to not be required, but people abused it (and each other) so ye... Had to be changed because of scammers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      I think my main complaint with your idea is that there is a veneer of idealism spread across it. You want the simple numbers to make it easier, but all they will do is make it easier for someone to come to the wrong conclusion because the fine details will kick them in the nuts. As it is right now, the tiny bit of arithmetic is NOT the obstacle to understanding what will fit and what will not fit. The reality of trying it is what determines whether it will fit. If you had a "standard rule" that R34 GTT guards have that magic 100mm space from the hub face to whichever side you were worried about, and someone said "excellent, this wheel is only 98mm in that direction, I'll just go spend $4k on them and jam them on my sick ride".....they would just as likely find out that the "standard rule" is not true because the rear subframe is offset to one side by a fairly typical (but variable) 8mm on their car and they only have 92mm on one side and 108 on the other.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      Ah ok interesting to know.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
×
×
  • Create New...