Rb26 Sard 800Cc Injectors, Greddy Plenum, Ap Racing Brakes

[scissored sil]

Hey All,

My old for sale thread sorta just got added to and is old and messy now.

Thought I would start a new thread that actually had the items for sale listed.

All items are located in North Brissie. (unless stated)

Postage can be arranged, at buyers expense.

My best contact is either mobile 0428142684 or email [email protected]

rb26 coil packs - $200 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

sard 800cc injectors - $600

These have about 5000km of use on them. I wil be upgrading to higher flowing injectors. - does not include fuel rail.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

[scissored sil]

Injectors sold pending payment.

[scissored sil]

bump

[scissored sil]

injectors fully sold.

items still available:

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

Open to offers people, worst I can say is no thanks.

[scissored sil]

bump...

[scissored sil]

bump.

[scissored sil]

bump...

[scissored sil]

any realisitic offers guys and girls?

[scissored sil]

bump.

and back on the market, if anyone is interested...

short motor component of my engine. Done about 5000km as well.

N1 Block

Tomei 2.8L cooling channel type kit (pistons, rods, crank)

Tomei oil pump

ATI 1000hp type balancer with the pulley for the water pump.

Tomei sump baffle.

um... *shrug* 10k?

[loky]

pm sent

[scissored sil]

Tomei oil pump sold.

This is as far as I want to split it, as if i decide to keep the bottom end i it is getting dry sump.

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

[scissored sil]

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

[TriniGT]

ATi Damper price?

[scissored sil]

Long motor component isn't for sale sorry.

[scissored sil]

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

[scissored sil]

bump

[scissored sil]

bump...