Jump to content
SAU Community

Boost Sensor For A Bnr 34


GTR-N1
 Share

Recommended Posts

Oh I thought it might just be mine. I'm having the same problem. I recently bought a new MFD because my old one had a line down the LCD display. Once it was installed the boost gauge on it invariably worked. It ALWAYS worked when the old one was hooked up, now sometimes it works and shows boost normally and the rest of the time the boost gauge just has nothing on it at all??? Is thais what's happening with you too Terry?

Link to comment
Share on other sites

Yes Mike; exactly the same symptoms on the MFD.

Yet the Boost Controller Display works perfectly all the time.

So I'm expecting that the soldering of a couple of pins on the Sensor near the firewall on the driver's side will restore the bar graph to perfection.

Link to comment
Share on other sites

Hello,

Im no expert but if the gauge is not even showing on the GTR MFD, it could possibly be because the boost sensor itself is not being recognised.

Maybe check your sensor is not unplugged or if the plugs going to it are not stuffed, you could also check the sensor itself has no other dry joints inside it (apart from the common 3).

Grain of salt, but its a starting point.

Cheers.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Interesting that it has 2 to the USB stick. Are the ones to the USB stick different? Or labelled anything at all? Telstra 4G is Band 28 is the long range one you want, it's 700mHz. I'm trying to do some reading on the Cel-Fi stuff, but I can't find any decent info online that makes me feel comfortable being able to work out the sort of antennas we could get away to swapping it over to. The antennas I'm starting to do some stuff with at work, are a transparent antenna. They're designed to stick onto the window. Which means you wouldn't even have the antenna outside the car. Volkswagen have just started using the exact same types of antennas on some of their new cars (And from the same antenna manufacturer). But, RF stuff is a bit of a dark art some days, and getting it wrong in your car could make for a terrible waste of money trying to swap antennas :S
    • I'm not going to lie Duncan, Saturday and Sunday were pretty rough days. The sort of work I was doing would previously have ended up with me spending about an hour and a half chatting with Neil. Firstly about something I had a question about, and then both of us rambling off on tangents.  I think how Neil did things, and his attitude to getting it done is helping me in part to get this stuff done. Then I can actually do the things I enjoy more easily  
    • Talked to another R34 GT-T owner, he said bonnet of his car once fell and slammed from full height because of strong wind at a car show and nothing was damaged or broken, so I guess I'm just overthinking some things but yeah, just making sure I'm not damaging the car anyhow cause wanna keep it for a long time.
    • I would say 100% that it doesn't matter at all. I have an Al bonnet and I drop it sometimes, push it others. Have done so for 25 years and there's no way to tell that either has caused any problems (because there are no problems).
    • yeah, a black 4 door HR, stock AT RB20DE. Was a pretty good daily summer car, it was kept in a garage during winter but previous owner was fighting rust so most of the car was covered with rust undercoating, the trunk, floorpan, it started to rust underneath so I thought it would be better to find other chassis that was taken care better and do rust preventions myself, at least I would know where keep my attention at. Plans are simple, enjoy the car as much as I can, mostly on summer of course, winter here is long and not kind to 90s JDM, I wanna keep it mostly stock like, I'm not a huge fan of GT-R look or any body kits so gonna keep it as metal as possible haha, something more balanced look wise and yeah, work on performance, I was thinking about RB25DET but 20DET actually feels fun, as long as it's reliable I think I might keep it. 
×
×
  • Create New...