Jump to content
SAU Community

Recommended Posts

same clutch again, I like it :)

No point going nismo twin plate for a car making about 350kW I reckon.. money better spent elsewhere. I got to stop letting people borrow my car, probably why it's lead to premature death of clutch.

same clutch again, I like it :)

No point going nismo twin plate for a car making about 350kW I reckon.. money better spent elsewhere. I got to stop letting people borrow my car, probably why it's lead to premature death of clutch.

They must be total muppets to kill it in such a small amount of time.

My thing; been in the car for almost 9 years, over 300 7000 RPM plus launches, holding 475 kw. No rebuild, no nothing. Feels the same as a brand new one which i drove last night. Pays for itself really.

  • Like 1

Well other guys here have had great success with the clutch, so either mine is faulty OR my mates really just wore down the clutch driving it.

I'll find out next week, determined to pull it out, inspect it and I'll also do the turbo next week too.. I have all the lines/bolts/nuts/intake/gate ready to go.. just need to fab up a dump & screamer pipe..

Oh yeah, the 2-way Nismo is in too :)

Iv got a Jim berry full Monty best clutch ever in my opinion great to drive with and can handle as much power you want to through at it realisticly I got mine for $1000 off here and installed it myself and got the slave reco'd and braided line for $100ish

^ yeah that was going to be my first option (a few years ago), then someone showed me exploding JB clutches and smashed up bell housings. Then I went for NPC :)

Everyone has been having great luck with them, except mine.

  • 2 weeks later...
^ yeah that was going to be my first option (a few years ago), then someone showed me exploding JB clutches and smashed up bell housings. Then I went for NPC :)

Everyone has been having great luck with them, except mine.

Is there a coolant leak or oil leak into the clutch area at all? Seems odd your having these troubles. My recon NPC clutch feels really good and just as bitey as always

Is there a coolant leak or oil leak into the clutch area at all? Seems odd your having these troubles. My recon NPC clutch feels really good and just as bitey as always

** weird thought I replied to this thread on that tapatalk app... clearly not

There are no coolant leaks or oil leaks around the clutch area, besides the typical RB cam over leak. I was supposed to pull out the clutch during the break but was hungover everyday so never got around to it lol

What people done realise is that there is very little available meat on the clutch that wears. The difference between New and worn is about 0.8 to 1mm. So any driving that slips the clutch wears it at a rapid rate. This includes people who can't use a clutch Properly and slip off the lights etc.

Pull it out and measure the wear. Might be able to get away with just replacing the disk

  • 2 months later...

UPDATE:

Pulled off the box (well I paid a pro this time, was lazy but glad I did).. turns out my NPC clutch looked as good as it did the day I put it on. We measured the disc it was about 0.04mm worn (which is nothing), both disc & pressure plate were in top notch. Had the pressure plate tested and the clamp was actually 1870 kg..

So why was it slipping you ask?

The previous owner had installed the incorrect bearing carrier so when the box was placed back onto the motor essentially the clutch was being ridden all day long ever so slightly.

So whilst the box was off, Scott from Western Clutch cleaned and inspected all my parts.. turns out ALSO my clutch fork was fractured.. lucky it never broke because that wouldn't have been fun.

Executive Decision Time

Since everything was off & being sorted, I told Scott I had issues going into gear on the track when I was in super dooper high RPM. He mentioned that the plates Doug used were heavy and when you press the clutch pedal to change gears, the inertia of the disc keeps the box spinning and hence it crunches when you select a new gear.. I bit the bullet and changed to a lighter custom carbotic plate.

At the same time, Scott modified my pressure plate, machined it and machined a step onto my fly wheel. He also replaced my bearing, bearing carrier (new), clutch fork (new) & spigot bush.

By the end of it, I now have a clutch that feels as light as a Yaris clutch (I'm not kidding either) with a clamp of 1700kg and no more crunching at high rpm shifts.

Sometimes it's actually worth paying a professional than doing it yourself.

Cheers & big thank you to Scott, his dad & team at Western Clutch at St Mary's :yes:

Now, anyone want to buy a 10" NPC Carbotic clutch disc that's nearly new? under 14 000 km old (3 track days, 1 skid day, and at the time car only had 200kW) :woot:

  • 1 year later...

Sorry for bringing up an old thread! But am looking at purchasing a clutch for my r34gtt. Plan to make about 350rwk.. just wondering if the npc 10" hd carbotic is still the recommended choice for handling street/few track days a year and launches ect.

Cheers guys

NPC can probably answer that question for you. Honestly, they are not just trying to sell as many clutches as they can, they will help you choose the right one for your application.

It should be fine. Go the Billet flywheel as well as it directs a bit of air through the clutch as it spins. The main killer of these clutches is excessive heat, so as long as you arent riding the shit out of it, you shouldnt have an issue.

Mine is street driven and taken to the drags once in a while, my clutch was fine last time it was out of the car, no signs of any problems at all. I got it rebuilt as a preventative thing, but I dont think it was necessary at all. Had an NPC clutch for probably 6 years now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...