How To Change Idle Rpm - Vipec

[LANDSCRIBBLE]

My idle is going from about 1500rpm on cold start to 900rpm when it warms up, which is a bit too high for my liking. Does anyone know how to adjust the idle in the vipec v44 settings?

[gotRICE?]

Isnt a Vipec a Re-Branded Link?

If so, in the Vipec version of PCLink there should be a folder called "Idle Speed Control" (this is assuming the software is the same.. )

Open the first setting in that folder, again, "Idle Speed control" and scroll down to "Idle RPM Table"

Open up the map, and should be pretty straight forward from there. Choose your idle based on ECT.

Have a play with it till you get it right.

Im having issues with my Idle on my R33, but im thinking this is because the Idle control isnt seeing 12v iv tried two units on it and no go. Used to work.. lol. But i do have a circuit that isnt getting a full 12v, so im guessing this might be on the same one.

Edited April 24, 2012 by gotRICE?

[DVS JEZ]

Turn the screw in on the iac

[LANDSCRIBBLE]

Yea i heard Its a link with an expensive vipec sticker slapped on it. Thanks, ill give that a shot tonight.