Jump to content
SAU Community

**japan** Burning Black Work Meister S2R 18X10 +15 (X4) 5X114.3

vipv35
 Share

Recommended Posts

vipv35 Enthusiast

vipv35

Posted
Posted

-Name: Jamel Lopes-Hurt

-Email: JDIZZY204 (AT) GMAIL.COM

-Phone #: ZERO EIGHT ZERO THREE EIGHT THREE ZERO ONE THREE THREE ZERO

-Location :Osaka, Japan

-Postal code: 550-0013

I am selling a complete set of Burning Black Work Meister S2R wheels for 2200+PP+shipping (OBO)

Extremely minor curbage on one of the wheels but no bends at all. The wheels require slim tuner lugs which are included as well as the adapter but no center caps.

Shipping to anywhere in the states is the same cost (cheapest is sea mail at $250 for all 4 wheels)

Sizing is as follows for all four wheels: 18x10 +15

I am not interested in trades at all so do not ask.

PM me or email me for quickest response. Thank you.

Pictures:

7156066596_0ac6ed0889_b.jpg

Examples:

post-23512-12116152781056113768%20(Medium).jpg

GTR02.jpg

Link to comment
Share on other sites
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      Lifters (solid vs hydro) do not affect VCT. For cams, just contact Kelford in New Zealand and tell them what you want to do with the engine and that it is a solid converted 25. They'll know what to give you. FWIW... you can probably use any cam with either hydro or solids at that power level. By "any cam" I mean, there probably isn't a particular reason for the profile to be much different between the two.
    • TomSky33
      RB25DET with solid lifters - which cams ?

      By TomSky33 · Posted

      Hello from Germany,   i build my RB25DET Series 2 -> Target 600hp i have now ordered solid lifters from Tomei for the cylinder head and will replace the original hydraulic lifters. Which cams can you recommend ? It is only a street car.... Maybe i order a Garrett GTW38 or something like that.   and what is with the VCT ? is it blocked with the solid lifters ?   Attention is a RB25DET with solid lifters!   Thank you for your help    
    • robbo_rb180
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By robbo_rb180 · Posted

      Diff arrived from Japan last week.  Nismo gt pro 1.5way for gtr. Still deciding whether to use 4.11 or 3.9 gears before installing.  Spent some time yesterday going over what's needed to finish engine bay fuel lines. Got a list so will order soon. Played with radiator placement and decided on stock location with bottom spaced a bit for a small amount of angle. So ordered standard mounts and rubbers. Reason for this is the 180sx was a pain to work on any of the coolers and was also going to take longer to fabricate mounts. Today made a bracket to mount the dbw throttle pedal. Factory location wasn't great to work with the pedal box. Luckily there's a rail that pedal box mounts too so did some measuring, drew up a design and got stuck in.  It's made of 3mm aluminium and has a lot of strength just need some bolts, washers and nuts to finish up.   If I get time tomorrow I'll pull the front bar and lights to start intercooler mounting, it will be flipped under the rad support which will require some trimming. 
    • niZmO_Man
      Gran Turismo 7 Time trial

      By niZmO_Man · Posted

      Got my first gold. Deep Forest Lancer Gr.4.
    • PranK
      R32 Gtst - Track Car

      By PranK · Posted

      Der its not even a 4 door. 🤣  
×
×
  • Create New...