Jump to content
SAU Community

Recommended Posts

intake manifold (with injectors and fuel rail )

both rear lower control arms

clutch brake pedal plus master cylinders

cas

tail lights

fuel pump

adjustable front tie rod ends

take the lot for $150

s2 r33 front seats $100 for both

IMG_10201_zpsfb05993f.jpgIMG_10191_zpsd8f98250.jpg

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

PM'd you :)

Brand New Unopened 2" SPECO 533-03 Street Series BOOST GAUGE - $50.00 $40.00 pickup or $50.00 Posted.

post-78856-0-49856600-1384509169_thumb.jpg

Want it Gone.

Buy the flamin mongrel ya dream boats!

For the love of rajab. :worship:

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

I want the micra, but no kesh :(
661 Carbon fibre full face pushbike helmet, size MEDIUM. Purchased brand new, worn 2 or possibly 3 times, never actually utilised (ie never had a crash while wearing). Minor cosmetic scratches sustained while moving house; in no way affects safety, you can barely see them. Helmet is the same as below picture.


$200, will post at buyer's expense


1448.jpg



Mace "swat jacket" body armour, unsure of size (can check). Worn only once, never utilised either. Comes with detachable armadillo-style spine protector. Same as pic below.


$150, will post at buyer's expense


p4pb5178452.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...