Jump to content
SAU Community

Recommended Posts

intake manifold (with injectors and fuel rail )

both rear lower control arms

clutch brake pedal plus master cylinders

cas

tail lights

fuel pump

adjustable front tie rod ends

take the lot for $150

s2 r33 front seats $100 for both

IMG_10201_zpsfb05993f.jpgIMG_10191_zpsd8f98250.jpg

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

PM'd you :)

Brand New Unopened 2" SPECO 533-03 Street Series BOOST GAUGE - $50.00 $40.00 pickup or $50.00 Posted.

post-78856-0-49856600-1384509169_thumb.jpg

Want it Gone.

Buy the flamin mongrel ya dream boats!

For the love of rajab. :worship:

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

I want the micra, but no kesh :(
661 Carbon fibre full face pushbike helmet, size MEDIUM. Purchased brand new, worn 2 or possibly 3 times, never actually utilised (ie never had a crash while wearing). Minor cosmetic scratches sustained while moving house; in no way affects safety, you can barely see them. Helmet is the same as below picture.


$200, will post at buyer's expense


1448.jpg



Mace "swat jacket" body armour, unsure of size (can check). Worn only once, never utilised either. Comes with detachable armadillo-style spine protector. Same as pic below.


$150, will post at buyer's expense


p4pb5178452.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was planning on getting an R35 MAF and the adapter, should this be okay? Also any idea where I could get my hands on an intake pipe?
    • I mean yes, if you're starting from scratch on an unknown engine yes you don't need to be doing all kinds of math in the background but if you're doing relatively minor changes like AFM + injectors + boost up with some aftermarket turbos it takes quite a bit of math if you want to do something like maintain OEM fuel + timing tables but compressed and then a bit more load scale up top. I think I've spent too much time working on big engineering nightmares though so I'm a big fan of trying to constrain the scope of whatever work I'm doing as much as possible and trying to get it right before moving on. For example, a local owner just did the usual E85 + single turbo conversion to his R32 GTR and nearly burned his car to the ground doing some spirited driving up the local mountains. Turbine is unshielded and too close to the hood insulation. It's tough to balance "just get the project done" and "seemingly small details can cause massive setbacks I'm not willing to deal with".
    • No idea about Neil's steering wheel, but I have the same behaviour in the Stagea. I doubt it has ever been messed with so might be normal. Indicating to turn right at a roundabout and correcting even a little bit to the left to go around will cancel the indicator. Never considered it an issue other than it being a bit odd.
    • Does anyone know if this is off centered? Looks like it, when I indicate to go right, but turn my steering wheel slightly left it cancels (was always like that even before I started messing around with it) was wondering if anyone else has the same issue?
    • Nothing photo worthy since last update, lots of little plumbing bits for the AAC/Cold start valves, and unfortunately I still need another couple of parts for the brake booster line and the AAC into the plenum. Otherwise it all looks good to start up engine wise, onto checking the electrics/interior
×
×
  • Create New...