Jump to content
SAU Community

A.c.t For Sale Thread


Recommended Posts

Good to see you on here again Andrew I'll vouch for you :)

Keep me in mind first for the Nismo Seat covers :thumbsup: 

I've been seeing your car nearly every day for a fortnight

Prices are good. You wont get a new front bar with N1 vents and lip for under $1000. So in that condition second hand is about right.

Edited by Sinista32
Update
Link to comment
Share on other sites

Thanks Richard. Car should be off to Jerry's in a few weeks. 

Seat Covers are ready to go, I just need to work out what they're worth and will get onto that soon.

Been slammed with PM's for the bars and everything is sold (pending payment). 

 

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Opening up an genuine EOI for Canberra people for the R. People that know my car should know what it's realistically worth. Genuinely interested parties feel free to message me. 

Link to comment
Share on other sites

Good luck mate :thumbsup:

as a side note If yo have some gear you haven't bolted on or fitted let me know via PM :)

lastly I'm aware that Rosie Vol2 will be out an about on Canberra roads

  • Like 1
Link to comment
Share on other sites

11 hours ago, Anfanee said:

Opening up an genuine EOI for Canberra people for the R. People that know my car should know what it's realistically worth. Genuinely interested parties feel free to message me. 

:(

  • Like 1
Link to comment
Share on other sites

On 2017-5-2 at 10:21 AM, Anfanee said:

Opening up an genuine EOI for Canberra people for the R. People that know my car should know what it's realistically worth. Genuinely interested parties feel free to message me. 

In true Anfanee fashion...... Would you take $50?

  • Like 2
Link to comment
Share on other sites

  • 4 weeks later...

My turn again.... Posted this in the main for sale thread, but can't hurt to post it here, too:

R32GTR Seats and Genuine Nismo Seat Covers

I have my R32GTR seats up for sale. Hard to know what condition to describe them as, everyone's opinion is different, but I'd say very good condition for the drivers seats and whatever better than VGC is for the passenger seat. 

Drivers seat has the usual small tear and a small mark near the front centre (which looks like it'd come out easily). Can't see any marks on the passenger seat at all. But what you see in the pics is what you get (happy to provide additional pics if needed). If someone buys the seats on their own, they won't come with the centre trim in the head rest (you can see what I mean in the pics) because they've been re-trimmed to match the Nismo covers and they need to go with the Nismo covers. However, if someone ends up buying the covers separately and has the trim piece on their own R32 seats, then I'll ask for that as part of the sale and send it on to you when I get it. It's not ideal, but it's the best solution I can think of. Will also hang on to the seat belt clips as I need them for the new seats, but that's pretty standard.

I also have genuine Nismo seat covers (front and rear) which look amazing and are in as new condition (have only been on for a few thousand km's). They're of the fit and quality you'd expect from Nismo i.e. exceptional. 

I'd prefer to sell them together (seats and covers) for $1,800 but if you only want one or the other then the seats are $1,000 and the covers are $800.

Let me know if you have any questions. 

Andrew.imageproxy.php?img=&key=4b1e78680f916b86imageproxy.php?img=&key=4b1e78680f916b86

2.JPG

5.jpg

Nismo Rear.jpg

Nismo Fronts.jpg

Edited by Veilside R33
  • Like 1
Link to comment
Share on other sites

On 5/2/2017 at 10:21 AM, Anfanee said:

Opening up an genuine EOI for Canberra people for the R. People that know my car should know what it's realistically worth. Genuinely interested parties feel free to message me. 

Will be asking $38,000 for her when i officially put her up for sale in the coming weeks. Giving ACT people the chance before i put it up properly. Again people knowing what work has gone into my car should know 38k is a bargain for what you are getting, so the price is pretty firm. If you know anyone or if you are genuinely interested PM me and i can give some details, otherwise you can check my build thread for an entire history on the car and what it has. The only swaps that will be considered will be for either a Ducati 848, Ducati 1198, or a BMW S1000RR/S1000R with heavy cash my way. No parts that are on my car will be removed before sale, what you see in the build thread you will get. It will also come with every spare i can find for it that i have removed. 

 

Link to comment
Share on other sites

On 06/06/2017 at 0:38 PM, Anfanee said:

Will be asking $38,000 for her when i officially put her up for sale in the coming weeks. Giving ACT people the chance before i put it up properly. Again people knowing what work has gone into my car should know 38k is a bargain for what you are getting, so the price is pretty firm. If you know anyone or if you are genuinely interested PM me and i can give some details, otherwise you can check my build thread for an entire history on the car and what it has. The only swaps that will be considered will be for either a Ducati 848, Ducati 1198, or a BMW S1000RR/S1000R with heavy cash my way. No parts that are on my car will be removed before sale, what you see in the build thread you will get. It will also come with every spare i can find for it that i have removed. 

 

Dislike

  • Like 1
Link to comment
Share on other sites

If anybody is in the market for an R33, or knows somebody else who is, have a look at the below link. 

I have it in my head that I would like to sell it to a skyline enthusiast, hopefully someone local will fit the bill. Thanks

 

 

Link to comment
Share on other sites

  • 3 months later...
  • 2 months later...
  • 1 month later...

1991 r31 skyline GXE for sale, wrecking - selling whole car.

NOTE: CAR IS DEREGISTERED and will need to be trailered away.  Cannot be driven.

The r31 has finally gone past the point of economical repair. 

Asking $200.

Would suit parts, some potentially useful bits:

-refreshed bottom end (at around 400,000 kms, replaced bearings, rings, cleaned pistons, honed bores, all seals and gaskets). Might suit someone looking to put together a cheap rb30/25 or replace the motor on tired r31.

-reconditioned SOHC cylinder head with not many k's put on it since installed.

-tow bar and tow ball

-4 serviceable tires on 4 dated but good condition auscar 5 spoke mags, 15"

-all complete and good condition glass

-headlights, stove-top tailights

-working condition automatic trans, still seems to function OK.

This is a complete car and the motor can be started and driven onto a trailer. Not sure what the precise issue was with the running of it, could be the old injectors, something to do with the ECU, who knows.

Best way to contact me is by phone, zero four 15 8 three 8 seven 90, and I can send some pics.

Will try to upload some pics on here if I get time.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
×
×
  • Create New...