Jump to content
SAU Community

Recommended Posts

Okay i have a rb20det that tends to bog/lean out right off takeoff 14.9 idle to 17.0 at less the 20% throttle, rb25 turbo afpr set at 38psi without vaccum, this issue accures when it cold and when its hot. i have checked maf voltage, replaced TPS sensor and set to .45 closed 4.4 WOT, also have change out coilpacks and ignitor with no change, plugs were changed out just 2 weeks ago. No missfiring, no bucking etc. This problem has haunted me since ive swapped in the Rb20 and now that ive worked out other issues i just need to figure this one out ive went throught via FSM and check ohms for everything ignation wise. no boost leaks it holds 20psi, and no vaccum leaks that can be found via Brake clean over everything possible to be a leak and the only place idle changes is PCV hose. if anyone can help put me in the right direction or have any helpful information on this please let me know.. im very mechanicly inclined so im no noob to Nissans or car Diag.

Link to comment
https://www.sau.com.au/forums/topic/399852-rb20det-issue/
Share on other sites

Fuel pump is a 255lph, um about 2 years old now i seem to get perfect pressure under no load. Filter filter was just replaced last oil change. Something i noticed yesterday when at the shop was the SAFC-2 which i use only for sensor check and RPM claimed TPS voltage was .38 closed but when check it from the pin at the ecu it was .45 which is were idle contact usally is idles like a champ and idles down great i have noticed random idle rps some times its 1300 few lights down its 850 which is were i have it set, maybe a bad or clogged/dirty AICV? Im trying not to tear about things that are not need to be taken off.. Also seems to feel less responsive when its warm but cts ohmed out good,

Link to comment
https://www.sau.com.au/forums/topic/399852-rb20det-issue/#findComment-6359317
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...