Jump to content
SAU Community

Recommended Posts

hi there,

So ive been searching around and cant seem to find the answer im looking for. im looking at buying some buddyclub P1 in 19x9 +38 and 19x9.5 +45. Im not sure if these will be too big for my r34. From what i can tell the width and offset should be fine but i cant find much advice on 19". Ive got racing logic coilovers going in also but i plan on not having them too low. Will i have to roll my guards? Will i run into any other problems with these wheels? Any advice would be greatly appreciated :)

Link to comment
https://www.sau.com.au/forums/topic/399879-19-wheels-on-r34-gt-t/
Share on other sites

19's should be OK, just double check the legality before making a purchase... But they came with 17's standard so i think it should be OK....

Check in the offset section for fitment, the standard guards on GTT's take pretty big wheels without any issues.... Good luck and Pics if you do it :yes:

19's should be OK, just double check the legality before making a purchase... But they came with 17's standard so i think it should be OK....

Check in the offset section for fitment, the standard guards on GTT's take pretty big wheels without any issues.... Good luck and Pics if you do it :yes:

Yeah it seems it should be ok, heading up to there showroom in a week or so. Looking at 18" "DTM Rush" now lol. Prefer 18s .Though its hard to pass up buddyclub 19" P1s for $400 brand new.

Ill take some pics once ive got em :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would again like too thank Matt for his help in me sourcing the detachable hard top for the little red car, without Matt's assistance in inspecting it and locking it down, I can guarantee it would have sold before I could get up to see it,  and as that was the only available NC hardtop in Australia, I consider myself extremely lucky on multiple levels To say I'm more that happy would be an understatement And, it is 100% water tight, I drove through torrential rain coming back south, and by torrential, they type of rain that doing 40kph in a 110kph zone was a real thing, and even then, the standing water on the Hwy was deep enough to throw waves I'm also more than happy that the huge "BEASTS" that Matt calls dogs didn't eat me for lunch, I'm sure the sniffs and licks were more to "taste test" me, over being to friendly Now to work out what colour to get it painted, panel match, or gloss black........first world problems are real
    • Actually I might have figured out. Looks like there is a tab according to google images but it's hidden. Silly me.
    • No clips on this one like the other connector. Only that red tab that I can push slightly up.
    • For any loom connector that has an obvious release that resists pushing far enough to unclip, just spray some silicone lube into it. You might also benefit from using a bent screwdriver or small pick to push in the right place at the right angle.
    • Hey all, I went to try and fix my indicator not canceling, but I couldn't remove the clockspring cable under the column so I could twist that green thin. Anyone know how to remove this cable? I see this red tab but didn't have any luck. I was thinking of unscrewing it but wasn't sure if it would cause issues. I did notice for my indicator stalk, 2 out of 3 cables were plugged in but the last cable wouldn't fit in the stalk. I'm getting it's for fog lights. It was like this when I originally pulled it off.  
×
×
  • Create New...