Jump to content
SAU Community

Recommended Posts

HI fellow members as you red in my topic title i have a r33 gtr apexi D jetro that i want to put in my r33 gtst mspec model

Reasons are built engine with big turbo so i want to run a map sensor set up and also being plug in ECU too

I dont want to go to a different ECU type eg haltech etc etc

My questions are has anyone had it done on their cars and what is involved differences etc etc.

I am interested in the ignition side of things, Intake air temp sensor, oxygen sensor etc and a few other things that differ rb26 to 25

Much help would be appreciated

Link to comment
https://www.sau.com.au/forums/topic/399963-r33-gtr-apexi-d-jetro-in-r33-gtst/
Share on other sites

thanks for that that link is helpfull, yeah i am thinking of getting a MSD rpm window switch so i still keep my VCT but i ll still see what am going to do

ill have to call few workshops around and see what they actually think.

My other option is just to get a haltech pro that just plugs in.

thanks guys for all the inputs, i have made my decision, spoke to few workshops around here in adel. so instead of swapping wires over and mucking around with the wiring i got myself a haltech platinum plug in pro, booked in for a tune next monday so ill see how it all goes :) hoping for mid 300s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They work on really anything track related now. They do my mates r35 gtr and it's a weapon of a car.
    • I use the penrite 600f in my cars and have had no issues even at Townsville v8s when I drove that but I bled fluid end of day for just in case. Good value and a about 38-40 on sale. Use castrol srf on the supercars and no need to Bleed brakes over a race weekend. Do the 1000km with no issues. Over 120 a bottle I seen at repco. A quality brake pad is always a good starting point the ebc stuff I've seen let go after 2 sessions with heavier cars. I'd be going to a decent track pad and maybe those porsche air guides on the control arm to help with some air over the rotor. Helps on 86/brz with stock callipers.  
    • yeah I've never understood that either.... And to answer an earlier question, I write the date on open bottles and throw them if more than 12 months old (which they almost always are, because I don't need to bleed them unless I'm changing lines/calipers etc in between)
    • Nah, the one that hit the boot was a big steel locker, around 6 foot height, 4 foot wide and 2 foot deep, empty it weighs about 15kg and had about that amount of stuff in it The photo didn't give a good representation of the actual damage, the large ding on the passenger side was about a inch deep, the one on the driver was about 1/2 inch deep, right on the curve, where the inner boot frame doesn't let you get behind it with a dolly Basically the same issue with getting behind the damage on the centre of the boot We could have filled it all with bog, but my OCD would be triggered every time I looked at it, knowing what hides beneath  As for the locker, I did get the shits with it and put it in the scap metal bin, but, I pulled it out and it is now sitting in the garage at home full of car servicing stuff, cleaning gear and random tools, it's going to pay for it's indiscretions
    • Whilst I typically don't cheap out on things, if I can save some money, like $1000, on a clean straight panel, that gives me $1000 to spend on other stuff, basically free money really 🤔 🤣
×
×
  • Create New...