Rb25Det Slave Cylinder Difference

[Slyy32]

Just wondering if there is a difference between the R33 slave cylinders - because i recently got a rb25det box for my r32 but it didn't come with a slave cylinder so i bought one from A1 and it doesn't seem to be long enough to engage the clutch, i have bleed both master and slave and checked if slave had leak in the boot, but they both seem to be fine. I even adjust the length of the master a few times.

I installed a brand new clutch kit (new throw out bearing and checked clutch fork) with a lighten flywheel if that makes any difference?

There is one that pre and the other post 94.

e.g.http://justjap.com/s...762&cat=&page=1

http://justjap.com/s...766&cat=&page=1

Thanks in advance.

Edited May 15, 2012 by Slyy32

[Dobz]

I'm assuming you mean it won't disengage the clutch.

Long story short the only difference between the two is the rod length, the one you have is too short and won't disengage the clutch.

[Slyy32]

Yes sorry, i always get engaged and disengaged mixed up. which one has the longer rod?

[Dobz]

Good question.....

Ring just jap and they should be able to varify it, all i know is the rod is too short.

[Slyy32]

I just decided to purchase the post 94 slave, and they are slightly difference. The main thing about them is one has a hole just under where you connect the clutch hose and the other does.

Tested it and its all working now. Cheers for the help.