Jump to content
SAU Community

Recommended Posts

Hi there I have a r33 skyline with rb25det running stock turbo with 160000kms. And I suddenly relised im getting no boost past vaccum what so ever goes up to 0 but no further? It also revs funny when turbo is meant to kick in and theres a strange smell? :/ anyone able to help? Thanks

Link to comment
https://www.sau.com.au/forums/topic/400206-turbo-leak-blown-turbo-rb25/
Share on other sites

When the turbine wheels snaps the turbine pretty much stops spinning. and you will no longer get the turbo suction noise either. Pretty common issue for skylines. If you run high flowed turbo with stock boost it will be fine. how ever recommend to upgrade cooler exhaust and get a ecu remap to get the full potential from the high flow.

But having said that check to see if any cooler pipe's popped or any thing happened in that manner first.

Even if the clutch was slipping, the turbo still would of produced boost if u were to rev it out of gear. As for the smell. when i give mine a bit of a hard time the exhaust smells like rotton eggs lol anyone else had this ?

Even if the clutch was slipping, the turbo still would of produced boost if u were to rev it out of gear. As for the smell. when i give mine a bit of a hard time the exhaust smells like rotton eggs lol anyone else had this ?

Haha my punched cat smells like shit now after a flogging

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
    • I used to love stock take. I used to take f**k of a lot of stock. /Rodney Rude.
×
×
  • Create New...