Eoi On Rb25Det With Head Work And Good Stuff.

[DanielH]

Hey guys,

Thinking of selling my RB25 i have built to get myself some cash, originally i got this motor out of an R33 in pretty good condition, but to get it up to really good condition i had the head reco'd at the cost of around $600 which included new inlet valve guides and stem seals, the exhaust guides had already been done, while the head was apart i also cleaned up the unnecessary lumps in the exhaust ports.

It all went back together with the following parts:

Performance Springs valve springs and retainers - $300

Camtech 272 Duration, 9mm lift cams - $1200

Tomei adjustable Cam Gears - $300 (not 100% sure i want to sell the cam gears yet)

ARP Head Studs - $150

New Durapro VRS Gasket Kit - $400

ACL Race Series big end bearings - $70

Also to go with this engine is a non-genuine Greddy Front facing plenum which i have gasket matched the runners to the head myself (needed doing really badly), and i have a billet fuel rail kit for this which allows the use of top feed injectors.

Together these cost around $500 and for the right price i can include some GTR Injectors aswell.

It also has a second hand Stainless highmount turbo manifold and Turbosmart 38mm Gate if needed, valued at around $500 for both items together.

As the engine sits it is currently a bare long motor, ready to have manifolds and accessories bolted on and put into use.

All up including the original price of the engine this setup owes me around $4500 but im willing to sell it for alot less than that so i thought i would see what kind of interest i get.

I can also throw in another r33 turbo bottom end with 1 melted piston for parts...

Also i should add that these cams are to suit an RB20 which eliminates the VCT, so this setup will drop straight into an R32 GTS-T using existing coilpacks, crank angle sensor, etc..

Or alternatively it would still drop into an R33 with minimal alterations.

I will try and upload some photos of the engine at some point.

Reason for sale is i sold the 32 GTS-T i built this for.

For any questions contact me on here or SMS me on 0408 117 171.

Cheers, Daniel.

[DanielH]

Here are some pics of the build

The comparison photo of the 2 cam lobes is one of the 272's and a stock rb25 cam.

Also the turbo pictured has been sold and is not included.

[DanielH]

May consider swaps and also may consider seperating the head from the block if someone is looking to build a forged motor and needs a head to put on it, this would also be a good head for a 25/30 build having no vct and bigger cams to help with flow for the extra capacity in the bottom end

[MRHD66]

How much would you want for the head ??

[DanielH]

with the cams, springs, gears and covers, it owes me around $2500 but would take $1800, the cams alone were $1200, would be happy to keep the cam gears and cam covers and sell it for $1500