Jump to content
SAU Community

Recommended Posts

Greetings.

I am doing some major upgrades on my car and am looking for some answers that I hope your can help with.

I would like to get a Greddy type intake manifold/Surge tank for my RB25DET NEO all of the ones I have see Greddy or nock off seem to be for only the ECR33 RB25DET. To my knowledge the intake side of the engine is identical at least as far as the air ports in the head go. I realize the are fuel rail and injector type issues. So I am wondering if I get the surge tank: A. Will it fit, B. what types of fuel rail injectors and injector plugs will I need to make it work.

I have see pictures of the surge tank installed on a NEO before so I know somebody has already found answers.

Thank for your time, and any help or advice will be most welcome.

Edited by debusan

Greetings.

I am doing some major upgrades on my car and am looking for some answers that I hope your can help with.

I would like to get a Greddy type intake manifold/Surge tank for my RB25DET NEO alll of the ones I have see Greddy or nock off seem to be for only the ECR33 RB25DET. To my knowledge the intake side of the engine is identical at least as far as the air ports in the head go. I realize the are fuel rail and injector type issues. So I am wondering if I get the surge tank: A. Will it fit, B. what types of fuel rail injectors and injector plugs will I need to make it work.

I have see pictures of the surge tank installed on a NEO before so I know somebody has already found answers.

Thank for your time, and any help or advice will be most welcome.

Say what? :huh:

What are you trying to achieve with the car? Just FFP?

http://www.skylinesaustralia.com/forums/topic/315700-plazmaman-plenem-vs-greddy/

This has some good info, if you are spending decent money on a build dont take a shortcut with the plenum.... There are a few threads on this i think.....

Yes I am talking about the plenum, I guess every country has different ways of saying things. The reasons I want to replace the stock one are:

1. Response (I am upping the turbo to a 3037)

2. Easier acces to fuel rail, etc.

3. Cleaner air piping configuration

4. It looks better (stupid reason but true)

I am not concerned to much about money but I would like to avoid un-neccessary expenses. Of course intercooler, injectors etc.. are all being swapped out for high performance items.

Edited by debusan

If expense is not an issue then spend the money and do it all properly. I have a pretty similar setup to what you are talking about (Assuming high mount) and it looks pretty good, BUT it has not been easy to do... Ask Hanaldo on here.... :P

Plazmaman do a bolt on plenum, look good, hopefully it performs as well as it has on other cars on my R34 GTT. Look up my build and see if thats what you want it to look like...

You might also look at this thread - http://www.skylinesaustralia.com/forums/topic/160464-trust-greddy-plenum-on-r34/page__hl__plenum+r34+gtt

If expense is not an issue then spend the money and do it all properly. I have a pretty similar setup to what you are talking about (Assuming high mount) and it looks pretty good, BUT it has not been easy to do... Ask Hanaldo on here.... :P

Plazmaman do a bolt on plenum, look good, hopefully it performs as well as it has on other cars on my R34 GTT. Look up my build and see if thats what you want it to look like...

You might also look at this thread - http://www.skylinesa..._plenum+r34+gtt

Yehhh, wise guy eh? :glare:

Lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But, do I have to? 😬
    • While doing my tailgate struts I found some rust. Also replaced my bonnet struts. Such a cool satisfaction with that job.
    • So I removed as much as I could from both sides. The shop vac did a great job of clearing 99% of it. I got it all as clean as I could and then absolutely drenched the whole lot in the rust converter. Tonight or tomorrow I'll hammer it again. The cavity must be close to 400mm in length and surprisingly I was able to get it right to the back.  I'll quickly reassemble and then pretend I never saw it. I'll post pics (for me to ignore later) soon.
    • Yea she is a hoot to drive 
    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for~?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate almost all modern cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
×
×
  • Create New...