Jump to content
SAU Community

Our New Dr30. Our Old Prince Skyline Gt

clubracer
 Share

Recommended Posts

clubracer Community Regular

clubracer

Posted
Posted

Hey guys,

Thought I should drop by and say hi. I have been meaning to for a while but I was waiting for the new ride to be confirmed.

My brother and I have just bought ourselves a DR30 Skyline RSX with the sole intention of racing it and using it as a tool to promote my little online motorsport business AUTOsports Australia.

Some of you might know this car already so if there is anyone that can give us any information on it that would be greatly apppreciated. As we have also never modified one of these any advice woulld be greatly appreciated. We are planning to run the car in Improved Production because we really want to be competitive and keep the car as close the Group A looking as we can! Maybe one day when we have money to blow we'll go and do something crazy in Time Attack with a different car...

On a different note we also have a Prince Skyline GT (my fathers) that is built for group Nb historics. New engine has been a nightmare so hasn't been on track for a number of years but should hopefullly see the track again in 2012.

Back to the DR30. We're going to source S13 uprights and front hubs, plus LCA's so we can run lots of camber and then also run S13 spec coilovers (which I have read about on here) and front brakes although will probably have to get some custom rear brakes done. Any thoughts on this?

ANyway enjoy the pics. Will get more up here soon.

Cheers

post-93639-0-01598500-1337387694_thumb.jpg

post-93639-0-14197000-1337387800_thumb.jpg

post-93639-0-61207700-1337387879_thumb.jpg

post-93639-0-58837100-1337388016_thumb.jpg

Link to comment
Share on other sites
  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

clubracer
clubracer

Yeah I know people will either love it or hate it, but at the end of the day I need to promote the business, and I want to do it with something that is a bit different that will stand out from the cro

clubracer
clubracer
clubracer
clubracer

Posted Images

prince_skyline Community Regular

prince_skyline

Posted
Posted

Welcome Peter...

Can't wait to see the car (Prince GT) out on the track. We (The Register :action-smiley-069: ) are all very much looking forward to it.

Beechworth was such a long time ago although we did catch up with your folks at Lithgow.

Congrats on the DR30 also. Probably going to be my next car as well - such a great car.

Will look forward to the build updates with the DR...

Cheers

Jason

Link to comment
Share on other sites
Ross Collaborator

Ross

Posted
Posted

Think old mates getting confused by tbe dry sump one getting around queensland. Similar color but different car.

This is my old built DR that is now back in Qld that the other poster may be referring too.

stuff057xb5.jpg

Link to comment
Share on other sites
  • 4 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Hey guys,

Well I got the interior stripped out and sold and hoping this weekend will get some dry ice in there to help get the sound deadener out. Still tossing up about the cage... looks like I'll be going steel though. Have spoken to Bonds about getting a kit to weld in myself although not sure yet. Been a little while since I rigged anything but might just do a bit of practice before jump onto anything serious like a roll cage. The price difference is huge, but then again the hours spent installing one will probably have me change my mind at the end of it all! Can't believe how much stuff came out of the interior though, and the amount of 80s heavy electronics and boxes... still more to come but the bulk of it is gone.

Check out more of the build at http://autosports.com.au/index.php/news-a-projects/17-project-dr30

dr30-6.jpg

dr30-5.jpg

Link to comment
Share on other sites
  • 2 months later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Okay so it's been a while so time for some updates. Work has been crazy and I've been concentrating on building the biz rather than the car but we've completely stripped out the sound deadener using dry ice and a timber mallet. The bets move even. The stuff literally shatters. All up for 16kg out of the passenger compartment and boot. Have spoken to some guys regarding a basic 6 point bolt in cage which should be the next step. With a bit of luck next month will see the cage, race seat, steering wheel, etc all done, so the inside will be pretty much ready to go. Have also lined up wheel, brakes and suspension so hopefully by the end of the year we'll get an initial test session in.

post-93639-0-42862900-1347608834_thumb.jpg

post-93639-0-80138700-1347608855_thumb.jpg

Link to comment
Share on other sites
  • 3 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

It's been a while since I have worked on the car but we're coming up to some nice updates. I spoke to the guys at AGI Precision Engineering and without a doubt these guys will be building the cage. Not only are they really well priced but the level of professionalism is second to none. It's a nice change to see such a spotless workshop - The guy was an engineer/mechanic at Williams F1 so would sort of expect it. Anyway it will be a nice 6 point weld in cage with hopefully a few extra features to add a bit more rigidity. If you want a cage tell them Peter from AUTOsports sent you! They also do a huge range of bolt in half and full cages fully CAMS compliant. Anyway, enough of that.

So the car should be going in there in about a fortnight and then after that the fun can start. The cage is the main part I couldn't do so as soon as it's back it will be full steam ahead.

Picked up these little AP beauties. Was originally going to run with the D2 calipers I had but they don't quite clear the wheels I want to run. By the way the D2 6 spot calipers are for sale. $400 no offers.

ap-caliper.jpg

d2-brakes.jpg

Link to comment
Share on other sites
  • 5 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Hey guys thought I'd post this in here.

Have the following for sale:

1. Complete wiring harness - $100 - Great condition

2. Standard FJ20ET computer - $100

3. Fully working air conditioning (degassed) - $100

4. Standard suspension struts - $80

5. Front brakes (discs and callipers) - $50

Before work commences on the cage we'll be fully rewiring the car and stripping at least another 30kg in wiring out and having a Adaptronic computer installed (which will also mean removing a lot of the pollution gear - another 5kg). All up I think we've removed in the region of 100kg out of the car.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 Gtst - Track Car

      By GTSBoy · Posted

      There are fixes for this. In industry we use compressed air for everything. It is frequently wet, and many things cannot tolerate it. So there are various forms of driers available that you can install. The simplest option for something like this would be a dessicant drier. Much cheaper to replace some silica gel than actuator cylinders.
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      That's a solid update mate, well done at WA FOS. You may already know this, but the actuators on the paddle shift are a service item and are sadly not that reliable. As I understand it they collect water from the compressor (condensation) which then rusts the bores/pistons in the actuators. A mate of mine had no end of trouble with them in one if his circuit cars, apparently it's a 'known issue'. Buy a couple of spares at great expense to ensure you never have any problems with the ones you've got! Any clues about what the new WTAC rules might be? While faster cars are cool the Pro class arms race has got to the point where you wouldn't even bother entering without a $1m budget and even then I don't think you'd win.  
    • joshuaho96
      Question about R34 GTT A/T Solenoids

      By joshuaho96 · Posted

      https://nissan.epc-data.com/skyline/er34/3945-rb25det/trans/317/31940N/ The pictures of the part you're talking about is clearly not just one solenoid. You can see another picture of it here: https://www.alltranz.com.au/shop/drivetrain/automatic-transmission/RE5R01A/product/9305/ The 4 speed automatic in the GTT is Nissan corporate stuff. You can search up similar jobs done on a Frontier or Pathfinder with a RE4R01B to get an idea for what the internals are going to look like and the procedure like this:   
    • Gojira34
      Head Unit Wiring Diagram

      By Gojira34 · Posted

      Hi Chris,   long time since your post, just wondering if you have the Pinout for the v35 stereo plugs, I bought the roem nis2 harness but it doesn’t match the v35 connector. any help appreciated, I can work out the grn and power constant. But the rest might be hard. thanks Tyson
    • Gojira34
      Head Unit Wiring Diagram

      By Gojira34 · Posted

×
×
  • Create New...