Jump to content
SAU Community

Recommended Posts

  • Replies 171
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

20m further UP the hill.....don't you mean further DOWN the hill? It's already at the top of the crest so you don't have big speed for the jump - or do you mean the chicane just as you exit the canyon?

I mean the 3rd set could have been further up the hill, (the set before the set on top of the hill). Certainly not suggesting any more cones.

When going hard I was in 4th gear between the 3rd and 4th sets of cones, no other section was that long and fast, and considering the nature of the road, it was probably one of the more dangerous areas at high speed.

But this is only a personal opinion and just an area that I felt unsettled the car. The set out of the cones was well done overall.

I rescued 2 parts of 2 runs from the corrupted video files:

1/ it is probably a good idea to make sure there is some coolant in the car before running:

2/ the quick run, but the bloody video is cut off about 2/3 through :mad:

I vote more chicanes! Suits the micra better :P

I agree! It keeps the GT-Rs modest! :P

another boat doing its thing below. Was this supposed to be a time attack grip event?

if so no one told Matt or i...

306221_457873234228213_214501475232058_1995605_41184386_n.jpg

I understeered straight through the last chicane so I had already failed at getting a good time at that point, so I figured I may as well put on a show :P

Good news people; I will be making another booking at Sutton.

Not sure of the date yet of course but don't miss it (there will be at least 2 months notice).

Also we will be more stringent on leaks, so please be mindful of that. There was oil leaks on the start line so anyone with that fix it now

Good news people; I will be making another booking at Sutton.

Not sure of the date yet of course but don't miss it (there will be at least 2 months notice).

Also we will be more stringent on leaks, so please be mindful of that. There was oil leaks on the start line so anyone with that fix it now

Thats not good, thats F**king awesome!!! I am NOT missing the next one!!! :woot:

I understeered straight through the last chicane so I had already failed at getting a good time at that point, so I figured I may as well put on a show :P

Same here, saw Eiji out there and decided to get on the gas a little early as i came out of the two corners after the jump, very very easy way to provoke oversteer i discovered. Almost made up for being so far down the timing sheet, will definitely be back for the next one to see if i can get into the 130's!

Entering the burnout comp again? :woot:

Hahahaa you saw that huh??

Hardly what I'd call an epic burnout..........I fell to the Fatz's peer pressure, he is a bad influence.

I do need to learn how to launch properly, it's never been my strong point.

Hahahaa you saw that huh??

Hardly what I'd call an epic burnout..........I fell to the Fatz's peer pressure, he is a bad influence.

I do need to learn how to launch properly, it's never been my strong point.

Was awesome :D

And don't worry, I couldn't launch mine with a high flow so I got NO chance with the 3037 ;)

i was told to wait till i was at high revs before dropping the clutch before doing my last run, i think i was smoking the rears all the way to the first set of cones..feltgoodman.jpg

Also we will be more stringent on leaks, so please be mindful of that. There was oil leaks on the start line so anyone with that fix it now

well, I surely know who was leaking water, and that won't happen again

i was told to wait till i was at high revs before dropping the clutch before doing my last run, i think i was smoking the rears all the way to the first set of cones..feltgoodman.jpg

That launch was somewhere around 4-5k but looks like it failed when I tried to grab second gear, as I said I still need more practice :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
    • Yeah, my offer was more to show exactly how rough and ready the rig can be and still be useful. Youtube vids will definitely show cleaner setups. Same concept though.
    • I would guess the seal has gone down at the speedo drive and gearbox oil has crept up the drive cable sheath and fouled the speedo head.
×
×
  • Create New...