Jump to content
SAU Community

Recommended Posts

Im competing in the dutch time attack championchip with my R32 GTR.

Lot to learn for me on this forum as i am the only one compeating

In time attack with an R32 gtr over here.

something about the car,

specs:

Build Rb26 engine,

(87mm) close to 2.7liter

Wossner pocketed forged pistons 8.2-1CR

Wossner forged steel con rods ARP bouten

ACL race serie's bearings

cranckshaft ballanced and polished

1.4mm Tomei MLS kop pakking

1.2mm oil restrictor naar cilinderkop

Tomei competition sump baffle kit

extendid sump 8.5liter

external head oil return

Tomei bronze valve guides

Tomei Valve retainers and folowers

Tomei B type valve springs 10.85mm

Tomei Procam 270graden 10.25mm lift

Haltech 33mhz boost control kit

Haltech platinum Pro ECU

AET T78-33D Single Turbo with trust 48mm external wastegate

Wiffbitz 3.5'' titanium race exhaust

Apexi 145mm super drag intercooler

Injector dynamics 1000cc injectors

Tomei 280 litre per hour in tank lift pump

Paxton aeromotive fuel pump

Sard Fuel Pressure Regulator

HKS Fuel rail, twin fed 11mm

C's quickshift

OS Giken twin plate clutch

Autosaurus 1 piece lightweight propshaft

Alcon Brake system, 370mm front, 350mm Rear

welded shassis+ Full FIA cage

Custom BC racing suspension system (car is sponsored by BC racing).

8266317.jpg

8249753.jpg

8249752.jpg

4995636.jpg

8247391.jpg

hope you will like it!

Link to comment
https://www.sau.com.au/forums/topic/400644-pro-import-r32-gtr-time-attack-car/
Share on other sites

Yes thats zandvoort haha ;)

your right, its not the most easy car to drive on zandvoort, with the tight turns, hills, and few ''brake killing'' brake points.

normaly im round the 2 minute barier on street tyres (we have to run dot tires in the series).

curently im running Falken RT615 semi's in hard compound, with some softer tyres like R888 ill have to take an

extra 3 seconds, will try that later this year.

first event i'm attending will be superlap battle its 17 of june!

You have to go to assen to, its a nice track for skylines, much faster than zandvoort ;)

Edited by Peter de Beus

Was hoping to do Zandvoort in early August but have some other things coming up which means I can't be os until later that month. Zolder and Spa appear to be a good track for street cars with some grunt. :)

I see the car still has plates. How is Holland for registration of modified cars. The cost to register cars in Belgium is rather scary.

Its quite easy to get plates, they don't look at anything. Most difficult is to keep them, as you cant make more then 98db, but normaly its no problem.

Let me know when you come over!

Spa is the best track there is, together with "the ring" ofcoars!

Edited by Peter de Beus

Hey mate,

What gearbox are you running? Fantastic looking 32!!

Not sure whether you were asking about improving lap times, but if you were :P for quicker lap times IMO ... (all relative to budget obviously)

Your engine looks the happiest bw 5500 to 8000 (I like to

400ps at 4500rpm newer turbos can do this) .... with a t78 there is definately time to be gained coming out of a slow corners 70km/h On the tyres you quoted ... I dare say ur loosing seconds off ur lap times as this will compound into the next turns.

What are ur tire options? The ones u quoted are at least a couple of

Seconds slower per lap compared to a Hankook z221 or yoko ao50

or even bridgestone re11s as these are all in the same class in oz...

Good luck for now !!

:cheers:

Thanks mate,

I know i can get seconds quicker with other tires.

I bought those tires for half the normal price, just to try how they are, i will try the the avon zzr or maby the new federal fz201. Yokohama and other brands are difficult to get, and verry verry expensive. Only yoko's that are available are the ad08, but im not sure how good they are....

I need an extra 10kmph in the slow corners.

It would help me with the slow spooling turbo...

Time to import some track tires! Haha

Will be upgrading the turbo for next season to a holset or gtx series or something like that

Yoko AD08's are one of the best street tyres around if not, the best for basically a street "semi" legal tyre. You would definitely pick up some time using better tyres and more speed in the corners!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Very decent bit of kit. Definitely black it out I reckon.  
    • Because people who want that are buying euros. The people with the money to buy the aftermarket heads and blocks aren’t interested in efficiency or making -7 power, they’re making well over 1,000hp and pretty much only drive them at full throttle  best way to way make money is know your customer base and what they want and don’t spend money making things they don’t want. 
    • It's not, but it does feel like a bit of a missed opportunity regardless. For example, what if the cylinder head was redesigned to fit a GDI fuel system? It's worth like two full points of compression ratio when looking at modern GDI turbo vs PFI turbo. I'm pretty reliably surprised at how much less turbo it takes to make similar power out of a modern engine vs something like an RB26. Something with roughly the same dimensions as a -7 on an S55 is making absolutely silly power numbers compared to an RB26. I know there's a ton of power loss from things like high tension rings, high viscosity oil, clutch fan, AWD standby loss, etc but it's something like 700 whp in an F80 M3 vs 400 whp in an R33 GTR. The stock TF035HL4W turbos in an F80 M3 are really rather dinky little things and that's enough to get 400 whp at 18 psi. This just seems unwise no? I thought the general approach is if you aren't knock limited the MFB50 should be held constant through the RPM range. So more timing with RPM, but less timing with more cylinder filling. A VE-based table should accordingly inverse the VE curve of the engine.
    • I've seen tunes from big name workshops with cars making in excess of 700kW and one thing that stood out to me, is that noone is bothering with torque management. Everyone is throwing in as much timing as the motor can take for a pull. Sure that yields pretty numbers on a dyno, but it's not keeping these motors together for more than a few squirts down the straight without blowing coolant or head gaskets. If tuners, paid a bit more attention and took timing out in the mid range, managed boost a bit better, you'll probably see less motors grenading. Not to name names, or anything like that, but I've seen a tune, from a pretty wild GT-R from a big name tuner and I was but perplexed on the amount of timing jammed into it. You would have expected a quite a bit less timing at peak torque versus near the limiter, but there was literally 3 degrees of difference. Sure you want to make as much as possible throughout the RPM range, but why? At the expense of blowing motors? Anyhow I think we've gone off topic enough once again lol.
    • Because that’s not what any of them are building these heads or blocks for. It’s to hold over over 1000hp at the wheels without breaking and none of that stuff is required to make power 
×
×
  • Create New...