Best Spot To Hook Up Map Sensor Rb26?

[t51rb26]

hello guys i have a question on were to hook up the map sensor on my single turbo rb26 im using a HALTECH e11v2.where is the best spot to hook the map sensor to? please help....

not my picture is this a good spot?

[The Dan]

Yes that should work. The big hose to the right of it goes up to the balance chamber which is after the throttle plates.

The map sensor line can go to anywhere that sees vacuum and boost

[XRATED]

Best place is to tap the center 2 tb's and t them together into the map sensor.....

T'ing into any old vac/boost line will work, but isn't ideal.

[t51rb26]

Best place is to tap the center 2 tb's and t them together into the map sensor.....

T'ing into any old vac/boost line will work, but isn't ideal.

i do have the 2 center tb's tapped already because i use to have a pfc d-jetro and it had 2 maps.but do you think it will work if i just do as you say with just 1 map on dose 2 cylinders?

[DVS JEZ]

Yes it will work using just 1 map source but ur tuner will have to set up his tune accordingly to get transient throttle nice

[t51rb26]

^ thanks man i will do as you say and T them together into one and tell my tuner to tune my transient throttle on my haltech e11v2 thanks.