Jump to content
SAU Community

Recommended Posts

Hey i have 2x HKS 25/35 turbo's for sale, these are an awesome turbo to suit both RB20's and RB25's to make around 250-260rwkw, also have a HKS 25/40 for up near the 300rwkw mark, they are all direct bolt ons, with awesome response, maintaining the low mount position, great for cops!!

Asking $1100 for the 25/35 and $1200 for the 25/40, including all the lines and elbow to make it fit on directly to RB's.

Also have a T04E with a .50 comp, .82 turbine, high mount turbo with t3 flange - $800

all are in great nick with minimal play!

Located near mitcham in SA, can post anywhere in Aus.

any idea what sort of full boost figures for rb20 (for the 25/35, i presume it's the smallest?)

would the response be on par with the stock rb25 turbo on the rb20? (full boost around 4k)

any idea what sort of full boost figures for rb20 (for the 25/35, i presume it's the smallest?)

would the response be on par with the stock rb25 turbo on the rb20? (full boost around 4k)

hey mate, i got this with my rb20 which just runs stock everything except fuel mods etc. really depends what boost your running, but i was getting 18psi by 4500. this 20 was limited to 7000rpm for some reason though, you can run them to 7500-8000, so a pretty healthy power band of around 3500 at full boost/torque.

img0560h.jpg

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...