R32Gts4 Clutch. Push- Pull? Possibly Stagea Gearbox? ? ? ? Help

[joe blo]

hi guys. got a gts4 with rb25 in it last week. needs throwout bearing changed so i want to put in my billet flywheel and npc bigmouth clutch from my r33 gtst thats pulled apart. guy said it has a stagea gearbox in it but i dunno for sure.

what i want to find out is will my r33 clutch be the right type for my gts4? is there any wat to tell if its push or pull without seperating motor and gearbox. i dont want them to have it pulled apart at mechanics on monday to find that my replacement clutch is the wrong type

thanks guys, hope yas can help me

[Hanaldo]

Well Stagea's used the 33 GTR box, which I believe is a pull type? Anyone care to correct me?

In any case, if the slave cylinder is mounted behind the clutch fork then it's a pull type. If it's in front of the clutch fork then it's a push type.

Edited May 24, 2012 by Hanaldo

[joe blo]

can this be seen from outside the gearbox? i think so but not 100%

[sydking]

Gtr clutch would not suit my gtr, I have 33 gts4 so pull type, just the pressure plate need changing I think

[Hanaldo]

can this be seen from outside the gearbox? i think so but not 100%

Yes. Look for this:

If the slave cylinder (this:)

Is mounted at the front (the two holes on the right hand side of the picture), then it is a push type clutch. If it is mounted behind the clutch fork (the two holes on the left of the clutch fork hole in the picture) then it is a pull type.

[joe blo]

great work. yip both gearboxes are the front mounted type. so shud be able to use the good clutch on my gts4

[Hanaldo]

[G37Sam]

Great tip Hanaldo, I bought an RB25 gearbox from the salvage yard and the seller was clueless