Jump to content
SAU Community

Recommended Posts

Hi all,

I'm having problem with uneven tire wear due to the alignment geometry on the Vs, as I don't really drive that much It wasn't that much of an issue for me, but I'm planning to lower the car in the near future so I'm on the market for some SPC camber kits. I was wondering if anyone would be interested in a group buy for these kits to save some dollars :thumbsup:

Now many of you would have heard about SPC, for those of you who don't, there are plenty of threads and discussions on SPC camber kits on g35driver.com, most people who run these kits in their cars has no issues and were generally happy with it and will recommend them to others. If your tires are wearing out prematurely like mine then I'd strongly suggest you invest in these as the price of replacing 2 tires is pretty much the same as buying these kits, well for me at least if you're running 19's or bigger :whistling:

I'm already in contact with a vendor for SPC and he has given me some initial quotes but says he might have a little more room to work with the price if I can manage to get enough interest, so far the quote i got are:

Retail prices

SPC Front Control Arm L&R Pair RRP: $385Usd

http://thmotorsports...5/i-397516.aspx

SPC Rear Camber/Toe Kit RRP: $89.50Usd ($179 for a pair)

http://thmotorsports...0/i-396571.aspx

These prices don't include shipping, you're looking at around $60 (rear) and $100 (front) for shipping

Quoted prices

Front control arm pair $475 shipped

Rear camber/toe kit pair $220 shipped

Any questions feel free to ask, for those of you who have these kits it'd be greatly appreciated if you could give some feedback on them with regards to performance,installation, fitment or anything you like to add in.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/401036-eoi-spc-camber-kits-group-buy/
Share on other sites

  On 29/05/2012 at 1:09 AM, Dreadnought said:

I'm interested, also looking at the SPL fronts

Has anyone done a comparison based on adjustable camber range?

I'm not sure about the SPL's but the SPC are adjustable up to 6 degrees front and rear adjustments are +/-4.00 degree Toe +/-3.00 degree

  On 29/05/2012 at 8:18 AM, falconcoupe said:

I'd be interested in the rear camber kit.

Hopefully they can squeeze a bit on the price, as it works out to be $40.00 postage based on the retail price on the site, which is OK but not amazing.

If we can get 5+ confirmed orders it'd be $200 shipped, $20 for shipping is a steal i reckon

  On 29/05/2012 at 10:05 AM, Kolossus said:

how many people do we need to get these prices down? I'm interested in the fronts for sedan.

According to the seller, we need 5 confirmed orders. Right now we have 4 people who are interested in the rear and 2 for the front (You and I)

  On 30/05/2012 at 10:01 AM, aaronjo said:

If its the same parts as a 350Z I'd be interested.

Yes its the same for the Z

^ So you are in? :rolleyes:, I'm making a list of confirmed buyers as we progress. hopefully more people will be interested.

Confirmed List

Front Kit

  1. kvnz88

Rear Kit

  1. kvnz88
  2. falconcoupe

Copy and add your name to the list for those who are interested. cheers

After looking at the options and details, I'm in for both front and rear, assuming they are cheaper than ordering separately.

Confirmed List

Front Kit

  • kvnz88
  • Dreadnought

Rear Kit

  • kvnz88
  • falconcoupe
  • Dreadnought

  On 31/05/2012 at 5:32 AM, Kolossus said:

5 people across both parts? Or 5 each part? And what sort of price drop?

It's 5 parts each.

$200 rear for 5+ orders, $220 otherwise

if we can get 5 + orders for the front i'll work something out with the seller, hopefully can get it down to 450 or less..i'll keep you guys updated

Edited by kvnz88

I am keen for a rear kit. Not overly sure if I need the front?

I will be lowering the car with some 350Z springs. Front guards have already been rolled. And my wheel set up is as follows

Front - 19x9.5 +12 with 245s

Rear - 19x10.5 +12 with 265s

Would I need the front kit? Thoughts?

Confirmed List

Front Kit

  • kvnz88
  • Dreadnought

Rear Kit

  • kvnz88
  • falconcoupe
  • Dreadnought
  • Mayo_85

  On 06/06/2012 at 3:51 AM, Mayo_85 said:

I am keen for a rear kit. Not overly sure if I need the front?

I will be lowering the car with some 350Z springs. Front guards have already been rolled. And my wheel set up is as follows

Front - 19x9.5 +12 with 245s

Rear - 19x10.5 +12 with 265s

Would I need the front kit? Thoughts?

you probably won't need the fronts with an 1" drop, however the rear ones are always recommended with even a slight drop. Heck i even wanted to get the rears without any drop. you can always decide later when you get them aligned after you've installed the springs and see if it can be adjusted to near oem specs.

anyway guys i think we should set a deadline for this in order for me to start ordering, i say give it one more week, Tuesday 19th of June. hopefully 1 or more people can jump in to save the day, or else ( for those of you who are interested, are ok with $220) i'll put the order through. I'm holding off the fronts for now as there are just not enough interest.

Might be a silly question, but can the rears be used for camber or toe, like an universal arm or are they all different parts? The way the site is set out, implies its an universal arm with all the description under one heading.

I really want the SPL Pro products, but I need to separate what I want from what I need, spending too much already... :(

Edited by 81gSKy
  On 12/06/2012 at 11:55 AM, Cobey said:

I may be keen on the rears, how much - adjustment can they do... my current are maxed out at 5.5deg.

I think they only run 5 Degrees, which are you running now?

  On 13/06/2012 at 5:56 AM, 81gSKy said:

Might be a silly question, but can the rears be used for camber or toe, like an universal arm or are they all different parts? The way the site is set out, implies its an universal arm with all the description under one heading.

I really want the SPL Pro products, but I need to separate what I want from what I need, spending too much already... :(

SPL group buy? I need fronts to fit the new square 11s, haven't seen the rears, but if they have similar adjustment ranges to SPC then I'm sold....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I be your first customer? I would like hard lines done for the fuel system, 8AN up and 8AN back and the underside wire wheeled and coated (brush or sprayed) with that black tar shit.
    • Speak for yourself, I love the R33 interior. 32 is blergh. I like the 34 interior too. Then you start getting much newer in most cars and they all turn back to blergh. 馃槢
    • 500-600hp into a RB is already 'sinking endless amounts of money' into an engine. Especially a 30 year old engine. Unfortunately this is the RB Game. Considering stock power (or at least stock components) will do ~360whp on 98 by simply turning up the boost on the stock gear on a RB26, that would be where I'd say the cutoff point for "sinking endless amounts of money into the engine" Cause to even do this reliably you'd probably need to replace all the bits anyway cause they're old, starting your sinking journey anyway. I reckon the least painful way is rebuilding the engine to make 50hp over stock lol. The 'plan your ownership around a rebuild' was a common saying 15 years ago.
    • Well, the NA RB25 is nothing special in terms of the amount of power it makes stock, nor with any easy mods like extractors & exhaust, opening up the intake tract, etc, etc. And just like any small capacity NA engine, getting lots of power out of them takes a fair bit of money and, depending on how far you go with big cams and high compression and so on, quite grumpy to drive. So, boost is the answer. Many many many of them have had a turbo added. This is easy enough. Same as for any engine. Need the things you need to bolt on the turbo of choice, fuel system and management upgrades, clutch, stronger gearbox ( you do not want to run a boost RB25 through the NA box), diff, brakes, etc, etc, same as you would for most other NA+T things. Some much smaller number have had a supercharger added instead. These are good and cool, but have nowhere near the potential of the turbo route. All the same required upgrades apply. So, potential? Anywhere from not much to quite a lot, depending on how much effort and expense you want to go to. Is there value in the effort and expense? Objectively, no, there is not. If you're gaining enjoyment and don't mind blowing a lot of money on the project, then that's where the value is. Parts? Nissan dealers for some. Many many on-line vendors who do Japanese manufacturer spares (buy buying them from disposals at dealers around the world, direct from manufacturers, increasingly from Chinese knockoffs, etc) and warehousing them in Dubai or similar places. Amayama, Partsouk, etc etc. There are quite a few. Some local to Australia, some local to Europe, some local to the US. You can upgrade literally everything. For an NA, unless you're going to boost it, there's little point going past a nice exhaust, as I said above. After that (well, actually probably even before that) you should concentrate on making it handle the best it can, good brake components, light wheels and tyres, and just make it something to enjoy throwing through the curves. You'll never, ever win any drag races, so it needs to be taken as a nice point-to-point car. Throw in some Recaros or Brides, nice Momo wheel and gearknob, so it's pleasant to be in (because god knows, the inside of an R33 is not a pretty place!!) and away you go.
    • How many $$$ do you have to slip cams to logbook a car that鈥檚 not the orginal to the 1990 standard lol
  • Create New...