Jump to content
SAU Community

Recommended Posts

I bought some original Tomei cam gears from the US. Search for them on ebay.com. Pretty cheap compared to what you can get them for in Oz, maybe not that much more than the copy ones you are looking at. Doesn't really answer your question, but maybe something worth looking into.

Yeah I've sussed eBay, genuine tomei = $110 (raw brokerage.com) each. Copy = $85 for both. Both have warrunty etc...

I've bought a few alloy radiators, intercoolers, oil coolers etc off eBay & couldn't be happier, just reluctant to get something as crucial as cam gears.... Last thing I want is to f.uck my fresh motor for the sake of $100 :/

Just checked, you can get genuine Tomei, $282 delivered to oz for both exhaust and inlet cam gears. Probably can get cheaper even, but this is where I got mine anyway.

http://www.ebay.com.au/sch/kreative-moto/m.html?_nkw=tomei+rb+cam+gears&_sacat=0&_odkw=&_osacat=0&_trksid=p3911.c0.m270.l1313

Alot of SAU people run china cam gears, the only problem is the fasteners that come with them that are junk, best replaced with hi-tensile bolts. Plus china gears are just intake gears, which means to retard the exhaust side, you need to advance what is indicated (and vice versa).

But if you can get genuine tomei gears for $110 each, then do it.. maybe even organise a groupbuy through rawbrokerage to help save postage.

http://rawbrokerage.com/Tomei-RB-Adjustable-Cam-Gear-tom-rbcamgear.htm;jsessionid=1754F6158C2CCAF2C7474838600DC00D.qscstrfrnt05

^ tomei cam gears $119 each if anyone's interested. I'll email RB tomorrow & see what they can do with postage. But if there's no/ minimal difference to china cam gears I may aswell go china for $40 each?

Cheers

Intake and exhaust take the exact same gear (but not RB25's which use a completely different gear to suit VCT on the intake side otherwise the exhaust one is the same as other RBs), it's just the chinese ones they decided to put the holes there so you could use them either side. The markings for advance/retard on some ebay gears have been the wrong way around.

Whereas say the Tomei IN gear will only fit on Intake, and EX on exhaust.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That’s a beautiful setup Tao, Have u done any development with the new Turbosmart 40mm electronic straight gate, especially in this G30 configuration?
    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
×
×
  • Create New...