Has anyone re-trimmed the interior fascia?

[MarkG]

Hey guys, I have decided to try and retrim the interior fascia on my SII R33 and also the surround on the driver's side power window.

Anyone done this before?

I was thinking a carbon fibre weave look, done in stick on vinyl.

Or does anyone know where it can be done.

Thanks heaps.

- Mark -

[RB20LagWagon]

Can you get carbon fibre pants?

[MarkG]

?

[dan_the_man]

Not another one

[tomj]

speak to Andrew with the R3SPECT Supra... he had to get his done over east

[rep003]

The easiest & cheapest solution to the scratched dull grey look , is to scrape off all of the grey paintlike finish & polish the black plastic underneath It's a bitch of a job , but looks great in shining gloss black

[RB20LagWagon]

i guess they dont make carbon fibre pants

[MarkG]

rep003 : thanks dude - yeah I was thinkin on rubbin it back and painting or covering it.

RB20LagWagon : who are you?

[RB20LagWagon]

Someone who like to co-ordinate pants with car colour, geeze chill man, just having a dig.

You need to chill

[MarkG]

?

[Pva_Glue]

please stick with topic...

Mark talk to 25GTT who got his intereir done

also have a look at the http://www.perthcars.com

who provids cheap interior refit etc..

cheers

JOe

[drifta]

Hi i did my interior my self red leather looks sweet

[NO_RSPECT]

rian....dash and surround not interior trim

[R33 Impul]

Depending on your budget check this link

http://www.nismo.com.au/pricelists/General...ts/dashkits.jpg

I bought my bonnet from this guys, no problems.

[mexr]

I'm pretty sure The Spoiler Shop do this, as they painted my dash plastics for me (Could of really attempted it myself after looking at the procedure, but wouldnt of got the great results).

I know it costs more then just a strip back + paint, around 300 for all the plastics, but they do a good job.

I also know of some people in the eastern states who got some carbon fibre type of contact and did it themselves but apparently very time consuming! Good luck

[IMACUL8]

The SS and good job in the same sentance .... hahahahha

[GWP021]

redoin the dash and other hard plastic bits is pretty easy the only real problems i had when doin mine was gettin the origional coatin off the its just a matter of platic primer and get a paint guy to mix up a few spraypaks of your color for the best finish spray it with clear afta it took me a weekend to go from s#@$y worn dash to nice silver blue and not to many swear words either

[rs73]

I can do it myself but problem is I don't have a workshop to do it. And doing it in an open space at my place means while paint is drying dust/dirt particles could landed on the surface and spoil the result. I had this done on my speedo surround, because it was a small part, as soon as I spray it I took it inside and cover it with a box. Dash facia is a different story as it's way too large to find a box to fit to cover it. So I'm sticking with black on mine, but silver would be nice.

Seen blue, red, carbon fibre texture (stick-on) but never seen gunmetal. Anyone tried gunmetal before?

[BigDatto]

The easiest & cheapest solution to the scratched dull grey look , is to scrape off all of the grey paintlike finish & polish the black plastic underneath It's a bitch of a job , but looks great in shining gloss black

Thanks Bro, that's a top tip !

[pstanbis]

whats with all these dash's that need recovering/painting ? mine's still in pristine condition... steering wheel is completely ratted though !! can't paint that but....