Jump to content
SAU Community

Recommended Posts

Im just about to put a rb25det in my 32 coupe and i have the choice of the standard turbo or a vg30 highflowed turbo. I know next to nothing when it comes to turbos so I was just wondering what the better option would be and what each one would offer / the differences between the two.

If its of any help in making a choice i will be running a turbo back 3" exhaust, front mount, yellow jacket coilpacks and standard ecu. Probly not looking to boost over say 14psi as its mainly for street use and i will drive it as a daily pretty much.

Thanks in advance,

Matt.

Link to comment
https://www.sau.com.au/forums/topic/401497-which-turbo-for-rb25det/
Share on other sites

quickly before anyone gets in here, have you tried doing a serch on the vg30 turbo (either on here or on Google), the standard turbos performance is well documented in here and I'm sure you'll find a rough figure for the vg if you search around...

Those are pretty hard to come by these days, they have been discontinued haven't they?

well they are around just fewer, and they arnt the same low price/performance as a HG or VG30 highflow, but if the OP wanted real info it could just do a search...

standard ecu and turbo upgrade, I rest my case

For f**k's sake. The RB20 ECU wil not even blink if you put a VG30 turbo on there. The car will just go faster.

The way you guys carry on anyone would think you have to retune your ECU when you change you bloody spark plugs. There have been about a bazzilion R32s with VG30 turbos slapped on them that have run perfectly well and made the same power on about 10 psi of boost as they do on 13+ on the original turbo. And the mixtures are fine, and the engine doesn't ping itself to death.

To the OP. You won't likely be able to run 14psi with a VG turbo because your standard fuel system won't be up to the task. If you do not have a bigger fuel pump than the original then you shouldn't really even turn the boost up on the standard turbo, because the old original fuel pump is probably only days away from dying anyway, and will drop pressure at the top end of the flow curve. If you put a bigger pump in then at least you will keep full fuel pressure and your standard injectors will run out of flow where everyone says they do, not 25rwkW earlier. But they will still probably run out well before you get a VG30 turbo to 14 psi.

Yellow jacket coils are shit. Expect them to fail.

Choose the VG turbo. Run it at standard boost and don't wind it up unless on a dyno or at least with a wideband on it on the road. It will be good.

Any turbos is just a combination of wheels and housings, just the right on size for the job. .63 VG30 turbine is a good high flow base. Final out come depending on what the final goal is, car's setup as well as budget. I did a OP6 high flow (running same A/R turbine as vg30) using customized billet CHRA last year, made 293rwkws with full boost by 3400rpms on pump 98.

http://www.digi-hard...90911/power.jpg

http://www.digi-hard...0911/booost.jpg

Get a proper ECU if you are doing powered up mods. Other wise just bolton a R34 or VG30 turbo and leave it on 12psi of boost.

For f**k's sake. The RB20 ECU wil not even blink if you put a VG30 turbo on there. The car will just go faster.

The way you guys carry on anyone would think you have to retune your ECU when you change you bloody spark plugs.

Read the post again,

i have the choice of the standard turbo or a vg30 highflowed turbo.

The OP is more than welcome to run a highflowed turbo on the stock ECU. Sure it will probably be ok (although we have no idea who hiflowed it).

I would run the stocker with those mods, you might go the other way...it hardly requires getting your knickers in a knot.

Mate , first thing is to know where you are going with this, i started out with a highflow but you may soon get bored with that and wish you had more then wish you had just got a proper garrett turbo to take car of business, dont do things twice its too expensive....either do half measure with stock computer or go all the way and spend $$$$

my advice is get a highflow and be happy with say 220kw.. or go all way with a gt3076 or hypergear and go 280-300kw and know you have a real beast.....

For f**k's sake. The RB20 ECU wil not even blink if you put a VG30 turbo on there. The car will just go faster.

Who said anything about a rb20 ecu???

I would think if he's converting to a rb25det the smart thing to do would be to use a rb25det ecu, which will freak out even with increased pressure on a std turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
    • I have seen enough fire and brimstone from TSBs about roloc disks causing spun bearings that foreign object contamination is top of mind for me. For sufficiently large particles you might be right but usually it’s a distribution of debris and some of the larger particles can also break down and shed bits. If local shops report RTV contamination in a turbo is enough to wreck them I’m taking zero chances if I can help it.
    • Ask and ye shall receive! (eventually... ☺️) https://www.goo-net.com/usedcar_shop/0170208/detail.html
    • Weird ! Same Same with mine. Autoexcel in Bonnyrig is your friend ! 
×
×
  • Create New...