Urgent! removing rear disc on R32GTS

[bbenny]

Hey guys!

im in a bit of a predicament here! in the middle of replacing discs need to finish so i can get to work tom!

How do i remove the rear discs? i have pulled the wheel and caliper off, but the thing wont budge! do i have to undo the huge 36mm nut for the hub to remove?

thing is the DBA 4000 rotor looks like it would slide over that hub?

i removed the rubber plug and unscrewed two spring tentioned screws, but still wond budge.

and yes handbrake is off.

HELP PLEASE!

thanks!

[51jay]

MicK51: look for 2 threaded holes near the wheel studs, find a bolt that will screw in and then screw em both in and tighten evenly, u should see the disc start to seperate from the hub. There is nothing holding that disc on except the handbrake pads (which is basicly a drum brake), those pads are spring loaded so they push against the inside of the hub and make it hard to pull off. DO NOT UNDO BIG 36mm NUT!

[bbenny]

haha thanks mate, i figured it all out, new rotors look great on there now!