Jump to content
SAU Community

Recommended Posts

After a unfortunate little incident with a tree and cannot find a clean shell around to transfer all gear into, Decided to strip parts off vehicle which arent needed anymore, Here is a list and Prices inc package price. Before we start stripping, If there is somebody who has a good registrable shell in QLD, please contact me, If I can find one I will keep this and transfer all gear into new shell. Thanks in advance guys! :)

So theres;

1994 RB26DETT Engine, ECU , LOOM, GEARBOX + CLUTCH etc Basically Whole running engine package (Can be inspected still in vehicle , running, also have cold start video available on request for those unable to view :)

Or we can separate Engine, Gearbox, Clutch/flywheel/bolts whole package, front diff , drive shafts, Splitfire coilpacks (4 weeks on engine), Oil filter relocator kit utilizing braided lines+fittings, M'sports Air filters with inlet piping kit, 2x airflow meters, starter motor, alt, Aftermarket 2 into 1 downpipes from memory Tomei, Kakimoto Cat back exhaust, pwr steer etc etc etc

Bonnet (slight dent)

boot with gtr spoiler

Drivers side sideskirts

aftermarket mirrors

front window (you have to cut out, to be paid for prior to cutting)

drivers side door

passenger side doors ( both complete minus interior trim)

bumper plus lip (some damage/crack)

rear bumper with reo

Rear tail lights pair

front guards

front headlights

front indicators (one cracked)

Full complete interior, will sell absolutely complete trims and rear seats

Front seats separately or as package

good floor carpet All interior is like new no stains, tears or cigarette burns

dash

Passenger air vent

Centre Air vent both in GC

Climate control unit

Nismo Cluster 44kms

Pedals ( Manual conversion kit)

master cyl

brake cyl with booster

steering rack

cross member

Fuel Tank, Fuel pump

Intercooler piping kit with Aftermarket Intercooler custom made in Japan like new, stealth black

All plastics, radio surrounding, ash tray etc etc etc huge list almost everything available

Located Southside Brisbane

Eventually if somebody is quick and can offer me a shell please, doesnt have to be rolling but prefer to have rear cradle in it, must be straight shell and registrable , Will buy before I start stripping, working 12hrs a day cannot pickup phone all the time, please pm for more info

Edited by familka gtr

Hey Guys will check all info, Havent yet written up all engine/exterior with prices and what Im keeping,Havent found a shell :( So Looks like Most parts will go, Heres the Interior List with parts

Middle Air vents, Good $120

Left Air vent, good $80

Dash, Tiny bubble forming in usual spot, can just see it , one small hole cut out around dash curving size of 10 cent coin, No air vents but will come with side ones and plastic ones under window $80

Centre Console plastic surround, late rough texture model has, in fairly good condition + cig lighter $80

Carbon fibre material type gearboot, some flaking off, with plastic gearboot surround $40

Center Handbrake plastic surround + handbrake boot, good $80

Ash Tray, late rough texture model, good $30

Climate control, good $50

Original Cassette player with Din Brackets, good (plays) $ 60

Centre Console Gauges VOLTS< OIL TEMP< BOOST GAUGE, good $60

NISMO 320km/h Cluster with 44,000kms on the clock, good $300

Plastic over Cluster surround with switches, good $120

Center main roof light, good $30

Front Roof light, good $30

Sun Visors pair with brackets, good clean, $50

Roof Lining + Hand Rails, good $90

A Pillar plastics Both, good, $30 each or $50 pair

Full Seat belts plus buckles and all bolts, whole kit as its pulled out $120

Passenger window switch, good $30

Drivers window Switch, Fair will have to double check if works, if all passes $90

Full floor carpet, good $150

Bottom Kick panels passenger and drivers, good $20 each or $30 pair

Glove box, Cracked Handle still can use it just 2/thirds handle missing $30 with mounting brackets

Bottom Door sil plastics, good Pair $40

B pillar plastic, good Passengers $50 Drivers $50

C pillar plastics (rear window plastics) Drivers $100

REAR SEATS, good some stains here and there flakes should mostly come out from dirty hands etc no rips or ciggie burns Top/Bottom set $250

Rear GTR Trims passenger and driver, good, Will double check all clips makesure nothing cracked but looks the goods, pair $220

Front GTR Door cards in great condition, $250

Front Seats Pair, No seatbelt buckles as selling with seatbelt set or can work out a deal if you wanted them, These Seats are absolutely perfect, no stains, rips, tears, cigarette burns, fading, from what I can see they are like new, Pair $800ono Sorry not separating the pair

Or whole Interior Package for Seats and all Rear and Front Trims Rear seats and Front Seats $1400

Also have many more parts will update tomorrow night (saturday 9/6) With Exterior/Mechanical/driveline :) Whatever you are after please pm me!

Its only an Oil Relocator Kit with Braided lines and fittings,

The Price for Seats are above

Will Double Check Splitfires and let you know model number

Got photos of healdights will post up for you tomorrow, they are single projector from memory?

EXTERIOR: (White)

1> Passenger Door Bare,
$150
2> Window Regulator
$120
3> Window
$80
WHOLE LOT $250

1> Drivers Door Bare,
$150
2> Window Regulator
$120
3> Window
$80
WHOLE LOT
$250

Front Bottom Plastic Intake Feeds, good
$100

Plastic bottom plastic guard liners, good, pair
$60

Bonnet Latch Mechanism, good
$100
Latch Cable with dash handle
$20

Front Windscreen Plastic Cowl ( The plastic bit that goes under your windscreen
$40

Fuel Flap, good
$40

GTR Boot ( No Wing) With GTR Badge, has holes from Plastic spoiler
$150

GTR Rear Bumper, good $250
REO BAR
$120 Or as a
SET
$350

GTR Passenger Tail light
$80
Drivers Taillight
$80 $150 PAIR

Reverse Lights Left
$30
Right
$30
pair
$50

GTR Number plate lights
$30

GTR Rear Wing, Great Upgrade for r32 gts gts-t and S13 180sx or replace your old one
$180

Drivers side Quarter window, if it isn’t moulded into body and you can take it out
$100

Front Window
$80
(cut it out yourself no worries, but to be paid in full prior to cutting)

Rear Window Wiper motor
$30

Bonnet Hinges same for all R32 skylines
$100

Indicators
, one has a cracked mounting bracket, plastic still there to glue or make your own,
PAIR $150
or
$90
Each

GTR GRILL
, good
$150

GTR Headlights $
150 Each
or
$250 PAIR

GRILL AND HEADLIGHTS AS A PACKAGE FOR $350

GTR GUARDS
, good condition passenger has one tiny ding on bottom and one right on tip can barely see it
$250 EACH or $450PAIR

Bonnet
, One small tiny dent in front as lip goes over, wouldn’t be much to fix at all, Original Badge still there otherwise very good condition aside from that little dent
$500

Front GTR Bumper Bar with Lip
, Both need work, Bumper has one insert missing, Cracked in two spots and some blemishes, Lip will need some plastic filler work otherwise very useable and plastic weld would be a nice cheap gtr bumper bar
$320 or make an offer

Aftermarket Aero mirrors
Pair $150
clearcoat peeling otherwise good condition

Front Window Wipers pair
$40

Sideskirts 2 piece plastic, Drivers side good, passengers rear 2
nd
section has a crack where it bolts to quarter, nothing missing though
$180

DRIVELINE

Polished Japanese Adjustable caster rods, good $120

Steering rack with tie rod ends, good $100 Plus $80 For POWER/STEERING lines

Drive Shafts Front good boots (may have been rebuilt previously long time ago) $150

Rear Half shafts Rear $120

Rear GTR R200 Differential, Original LSD With ABS Sensor if needed, good $350

GTR Front Sway bar with links plus bushes $80

GTR Rear Swaybar with links plus bushes $80 or both for $130

Original GTR Fuel Tank with plastic protectors bare in great condition $200

Fuel Sensor Cradle $50

Fuel pump Cradle plus Original GTR Fuel pump in great condition $150

Steering Column (Available with key pending on door locks and who wants what) $200

Hicas Lines from Rear blocked off for hicas lockout bar, just lines from cradle area toward steering rack $20

Rear GTR Driveshaft with all Nuts/bolts $200

Front Drive Shaft $130 with all bolts

GTR ATTESSA Pump System, Working a treat $400

R32 GTR speedo drive cable (great condition) $140

R32 GTR boot and fuel cap release cable (great condition, everything intact) $50

R32 GTR bonnet release cable $60

R32 GTR attesa reservoir (good condition) $80

R32 GTR exhaust temp sensor (good condition) $70

R32 GTR hanbrake great condition $90

R32 GTR Front upper control arms, good $140

R32 gtr clutchlines slave to master inc box etc $80

R32 GTR PEDAL SET CLUTCH BRAKE ACELERATOR, great condition “GTR” Rubber pedal boots Set with bolts $170

Plastic foot rest $10

R32 GTR front lower control arms (good condition) $120 pair

Front Diff $150

Any other bits and pieces you are looking for, well have it just ask/offer away

ENGINE/MECHANICAL/ENGINE BAY

R32 GTR clutch booster (great condition) $70

R32 GTR brake booster (great condition) $70

RB26 standard clutch fan (good condition) $80

R32 GTR air conditioning condenser fan (good condition) $50

GTR Drier, Condenser and Aircon Lines, good $200

Aircon Compressor, good $250

Or Whole AIRCONDITION SET $400

R32 GTR windscreen washer bottle (good condition no cracks no holes) no washer motors $70

R32 GTR over flow coolant bottle, good $90

R32 GTR brake master cylinder -abs- $140, clutch master cylinder $80

R32 GTR ABS unit, complete system and in good condition, $350, Looks very good too

Window Wiper Motor $70

Fusebox with wiring and cover will pull out once shell stripped

Bonnet Latch (stick to support bonnet) $40 with rubber grommet

TKB Japanese Strutbrace Polished with black strut ends $120

And Any little thing needed from engine bay please ask/offer

1994 GREAT RB26DETT ENGINE < COMPLETE HAVE VIDEO OF IT RUNNING AND ALSO CAN VIEW RUNNING TEST WHATEVER YOU LIKE, LOOKED AFTER HAS 68,000KMS ON IT AND 44,000KMS on NISMO CLUSTER

Complete with TURBOS, gearbox, heavy duty clutch/flywheel/pressure plate combo, inlet manifold throttle setup and plenum standard injectors, standard Turbos (as far as I know) with inlet pipes, Silicon radiator and heater hoses, an extremely complete engine/gearbox package, Front Drive shaft, Transfer Case $5500

Twin Airflow meters for above setup $150

Razo Short Shift kit with Razo heavy counter weighted Gearknob, bolts $200

Split Fire Coilpacks, fewer than 6 weeks old, complete set $480

INTERCOOLER PIPING INC FACTORY BLOW OFF VALVES AND RETURN PIPES< AND A AFTERMARKET JAPANESE BUILT INTERCOOLER FOR GTR, Built to handle 1000hp Engine, All Black and hasn’t been used $650

M’Sports Mesh Air filter twin kit to bolt onto factory airflow meters and to replace factory airbox $250

Remote Oil Filter Relocator, Easy as changes sits on drivers strut tower, braided lines and fittings $180

Or as a Whole Package with Engine and Gearbox and all the above so you have Rb26dett motor with split fire coilpacks, complete running inc inlet pipes, air flow meters, M’sports air filter kits, Silicon heater hoses, Remote oil filter Relocator, Clutch and box on, with Razo short shifter kit, Full Wiring loom and Ecu inc Alternator and Alt loom, Power steering pump, Starter motor, Aftermarket Japanese Intercooler Kit with piping and blow off valves with plumback piping etc Whole Package $6500 For the set, Could take certain parts of interest for trade in also such as Silvia nismo front bumper, r32 east bear type front bar or mspec bumper, non turbo S13 goldtop SR20DE/CA18DE/DET engine in good condition could even be bare for an of the above parts listed. Located in Southside Brisbane

Email: [email protected] Or Personal message please.

KAKIMOTO Catback exhaust, light stainless steel with jasma approved stamp, great tone on GTR not very loud at all, goes 3" to 4" after the resonator

Comes with hollow Cat $450

TOMEI Type 2.5" Front Pipes bolt straight on, Good Condition $400

Heres a few pictures as requested :)

post-18510-0-82155900-1339328759_thumb.jpg

post-18510-0-43986500-1339328854_thumb.jpg

post-18510-0-62192400-1339328872_thumb.jpg

post-18510-0-56761300-1339328891_thumb.jpg

post-18510-0-41500100-1339328914_thumb.jpg

post-18510-0-94656300-1339328934_thumb.jpg

post-18510-0-92836400-1339328954_thumb.jpg

post-18510-0-92410200-1339328977_thumb.jpg

post-18510-0-19428100-1339328998_thumb.jpg

Hey mate do you still the rear boot carpet that goes against the "wall" of the boot. I removed a subby out of my car and i need the carpet to cover up the gap.

Quick update guys, Thankyou for your Interest and Parts Bought, Parts gone are

Headlights

Grill

Indicators

Pwr Steering Reservoir

Bonnet Latch top and bottom + Horns

Bumper + Lip

Climate Control

And looks like Radio will be sold too, Thanks again

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I ❤️ Matty I would like to thank Matty for going out his way in securing me a OEM NC detachable hard top for the NC Matty, your worth your weight in gold, and I cannot say how much I really appreciate your outstanding help I'll get it colour matched once I pick it up sometime in Dec-Jan 😁  
    • We have some genuine Japanese legally decommissioned car number plates now in stock 🙂 Add some legitimately obtained JDM style to your Skyline or other Japanese model, or simply as a garage/man cave decoration! About the 40mm hole: The Ministry of Land, Infrastructure & Transport in Japan recognised the popularity of keeping decommissioned plates among car enthusiasts and came up with a method to "destroy" (or render them unusable for street use) while still retaining their collectable/usable value for display etc.  We have 40mm hole covers available to cover the hole nicely with a Sakura motif, which are also available in white in (very!) limited quantities, however they frequently sell out. Please let me know if you're wanting one or more of these and I'll check availability. The Sakura motif covers are more common. https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-su-7515 https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-400mm-hole-cover *Please note that we can't obtain particular number or area name (eg: "Gunma 500 Fu ・86") if requested. All plates are provided as they become available after decommissioning. 
    • Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
×
×
  • Create New...