Jump to content
SAU Community

Eoi:- Private Drag Day At Adelaide 1/4 Mile. July 1St 2012


Recommended Posts

Matty, chin up mate, there'll be other private drag days - I'm keen to do a few.

Jet, sounds good.

I might pass the word around my work, should find one or two, or more, keen to get involved.

  • Replies 197
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

My mate that was Trying to get the original day going would be keen aswell as a couple of others.

I may be ready on july 1, but later date would be better.

The week after a scheduled meeting would be best for the track condition as it would still be sticky, im pretty sure there is no track prep for a private day included in the cost.

I'll check on track prep and confirm ASAP.

The next scheduled meet is 29 July.

On Edge, sounds good mate.

Matt

Can you also ask how fast times we can run without a cage etc.

At normal andra meet 11.0 us the fastest you can go before they kick you out, im hoping this is different on private day.

Andrew

Matt

Can you also ask how fast times we can run without a cage etc.

At normal andra meet 11.0 us the fastest you can go before they kick you out, im hoping this is different on private day.

Andrew

anything faster than 10.99 need a cage anything faster than 9.99 parachooooote as per andra specs

Okay, I've had a chat with the venue manager, Rino - good bloke, more than happy to take time and explain everything.

Basically, there are three options:

1. $3500. Max of 10 people/cars. No timing system. No track prep. $350 per person.

2. $5500. Max of 20. Full timing. No track prep. $275 per person.

3. $7500. Max of 20. Full timing. Full track prep. $375 per person.

All options include: Full safety crew, ambo and fire etc. 9am till 4pm time frame.1 driver + 2 pit crew. No additional spectators (other than pit crew). Wet weather refund or reschedule for alternatively date.

Numbers are set based on insurance requirements. One or two above 20 is possible but he would prefer to avoid it as it creates significant issues regarding insurance and adds additional fees per person.

No ET or MPH limits (within reason - no 7sec @ 180mph stuff) so below 9.99 is fine.

I guess the next move is working out if people are prepared to pay $375 for track preparation. I've driven my R33 at AIR minus track prep and it was interesting to say the least! Wheel spin 1st through 4th with a mere 260-270RWkW.

Worth noting on the quarter mile day a few weeks ago I had 11 runs with plenty of breaks during the day. I could have had 15 or so if I wanted.

Cost was $160 with full prep and timing etc

I'd highly recommend it

Worth noting on the quarter mile day a few weeks ago I had 11 runs with plenty of breaks during the day. I could have had 15 or so if I wanted.

Cost was $160 with full prep and timing etc

I'd highly recommend it

That's a more sensible price, 375 is really pushing it in my opinion, significantly more than a private track day for circuit !!!

Fair call, Josh, it's hard to ignore the value for money in a regular open off-street meeting. I'll be at the July meet regardless of what happens with this private drag day.

Matt, as i mentioned earlier if you get private day week after the meet the prep us still good.

I wonder how much a drum of vht costs, couldnt be much surely?

Only gets sprayed on with a garden sprayer, anyone could do that

seriously go the weekend after a event, decent tyres are a minimum anyway octopus grip is cheap and works better than vht cause u add it to ya tyres( paint brush) and even when u go heathcote theres no track prep its just the first coupla v8's lay some fresh rubber and away u go, ( track prep is overated if not done right anyway ) and 375 is getting up there whereas 275 is ok for what were getting . as long as theres timing and a slip ur going to p.b anyway as ull have heaps of runs to get it right and as the day goes on and temp rises the track turns for the better and runs faster just before 4ish ( baised as the winter we currently have) just sayin dont get hung up on track prep thats what the extra 5 seconds of spin is for :P

If i can get some proper tyres ill be out there again.

any recommendations for a 33 gtst rim and tyre size?

as wide and as high as u can fit m/t's do a bunch of irregular sizes to suit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...