Jump to content
SAU Community

Recommended Posts

I've been looking for Brembo's for some time now but cannot find a good set off a 33 or 34 GTR to put on my GTS t.

I've noticed that Brombo's off Evo's are quite cheap, I'm assuming that they're smaller than GTR unit's but must be better than

standard GTSt brakes. Anyone out there have any experience with such a conversion?

Or have GTR brakes for sale?

Link to comment
https://www.sau.com.au/forums/topic/402266-evo-brembos-on-skyline/
Share on other sites

The Evo F40 brembos will require Doglegs to fit them to your hubs unlike r33 brembos being a straight bolt on, the caliper design is slightly different overall size is slightly bigger being that the Evo use bigger rotors I assume but as far as braking force goes I'm pretty sure the pistons are of equal size to GTR brembos.

GTR brembos bolt onto most performance nissans of the same era whilst evo brembos dont bolt onto anything at all. evo brembos are much better though, and can cost around the same as GTR brembos. but be careful because the design of the adapters for evo brembos with the 320mm rotors aren't good:

http://www.ao-ps.com/techinfo/evobrembobrakesandadapterdesigns.php

  • 1 month later...

Evo 6s have brilliant brakes out of the box .

I'm very interested in the 350 conversion provided it goes in 17/8.5/30P Rays LMGT4s but I need to know what you do to correct the brake bias issue .

Mine is a non ABS R33 so the rear brakes would have to work harder or be upgraded as well .

What we REALLY need is a safe reliable rear brake upgrade and I suppose it needs to use the largest OE GTR discs to keep the hand brake mechanism as is . If that could be done with say std Evo 6-9 rear calipers that makes pad choices easy and in the same family .

A .

Thanks guys, will have a look for the thread, any reason GTR Brembo's cost $2000, and Evo Brembo's are $500????

Maybe cause Evo's that gravel rally throw 15's on and downgrade caliper size and you don't see gtr's rallying. My theory lol

Thanks guys, will have a look for the thread, any reason GTR Brembo's cost $2000, and Evo Brembo's are $500????

Purely demand and that's it really. You have to admit, EVO brakes are fking awesome.. they are massive!

Where was the thread that had the adapters etc? It had Evo 8-9 callipers with Evo 10 rotors i think? Looked the goods...... 350mm brakes at a bargain price, i would still be worried about having an adapter in tho :/

Some of the reason the brembos come up, they're susceptible to bad fade under extreme use on evos and aftermarket calipers for them offer bigger, thicker pad selection.

Won't be all that easy to tell, other than after installation - badly discoloured paint or burnt dust boots are giveaways though.....visible caliper flex and lousy pedal are usual symptoms if they've been overheated.

So , has anyone come up with a rear brake upgrade because big (350mm) front brakes are one thing but the back needs something better than standard to match . Evos don't have small rear brakes .

Also big rotors are going to weigh a bit and its all unsprung mass .

A .

Edited by discopotato03

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No......not yet Minister for War and Finances has stated that the Commodore has to go first Not that I am going to modify the NC any more than what it is already modified now.....
    • Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • January or Feb is it booked in for turbo fitment?
    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
    • Paint is only structural when applied to the outside of Chinese and Indian cars. Otherwise it should never be present between mechanical joints that were intended to be metal to metal. Pain slips, slides, cracks, compresses, and add thickness that wasn't intended to be there. It comes firmly under the category of "just no".
×
×
  • Create New...