Jump to content
SAU Community

Recommended Posts

I've been looking for Brembo's for some time now but cannot find a good set off a 33 or 34 GTR to put on my GTS t.

I've noticed that Brombo's off Evo's are quite cheap, I'm assuming that they're smaller than GTR unit's but must be better than

standard GTSt brakes. Anyone out there have any experience with such a conversion?

Or have GTR brakes for sale?

Link to comment
https://www.sau.com.au/forums/topic/402266-evo-brembos-on-skyline/
Share on other sites

The Evo F40 brembos will require Doglegs to fit them to your hubs unlike r33 brembos being a straight bolt on, the caliper design is slightly different overall size is slightly bigger being that the Evo use bigger rotors I assume but as far as braking force goes I'm pretty sure the pistons are of equal size to GTR brembos.

GTR brembos bolt onto most performance nissans of the same era whilst evo brembos dont bolt onto anything at all. evo brembos are much better though, and can cost around the same as GTR brembos. but be careful because the design of the adapters for evo brembos with the 320mm rotors aren't good:

http://www.ao-ps.com/techinfo/evobrembobrakesandadapterdesigns.php

  • 1 month later...

Evo 6s have brilliant brakes out of the box .

I'm very interested in the 350 conversion provided it goes in 17/8.5/30P Rays LMGT4s but I need to know what you do to correct the brake bias issue .

Mine is a non ABS R33 so the rear brakes would have to work harder or be upgraded as well .

What we REALLY need is a safe reliable rear brake upgrade and I suppose it needs to use the largest OE GTR discs to keep the hand brake mechanism as is . If that could be done with say std Evo 6-9 rear calipers that makes pad choices easy and in the same family .

A .

Thanks guys, will have a look for the thread, any reason GTR Brembo's cost $2000, and Evo Brembo's are $500????

Maybe cause Evo's that gravel rally throw 15's on and downgrade caliper size and you don't see gtr's rallying. My theory lol

Thanks guys, will have a look for the thread, any reason GTR Brembo's cost $2000, and Evo Brembo's are $500????

Purely demand and that's it really. You have to admit, EVO brakes are fking awesome.. they are massive!

Where was the thread that had the adapters etc? It had Evo 8-9 callipers with Evo 10 rotors i think? Looked the goods...... 350mm brakes at a bargain price, i would still be worried about having an adapter in tho :/

Some of the reason the brembos come up, they're susceptible to bad fade under extreme use on evos and aftermarket calipers for them offer bigger, thicker pad selection.

Won't be all that easy to tell, other than after installation - badly discoloured paint or burnt dust boots are giveaways though.....visible caliper flex and lousy pedal are usual symptoms if they've been overheated.

So , has anyone come up with a rear brake upgrade because big (350mm) front brakes are one thing but the back needs something better than standard to match . Evos don't have small rear brakes .

Also big rotors are going to weigh a bit and its all unsprung mass .

A .

Edited by discopotato03

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • careful when running the car after a boil over. Ive heard you can lose enough coolant that it won't show the right temps because of too much air in the system (or something like that). Make sure the levels are good before trying again.  Maybe a mobile mechanic can come have a look with their scan tool ?
    • OK, just for some extra clarity - there is more than one option at Frenchy's. 1. You can buy the whole kit - with or without the actual compressor. The whole kit includes mounts, hoses, condensor, etc. That's either ~$2200 or ~$2800. No surgery required with this option. 2. You can buy just the bracket (~$600), or the bracket with the compressor (~$1200). Either of this or the above option "without the compressor" is if you already have an Echo comp or you are able to source one locally. Whatever the case, in this option, you will need surgery done on your hoses to adapt to the new compressor. When I said "the Frenchy's kit", I meant the whole kit in option 1. It is obviously somewhat more $$ than a $1500 OEM compressor. But if I had to spend $1500 on an OEM compressor, I would certainly consider spending double that to renew and significantly update everything forward of the firewall. Another option is to rebuild your original compressor. My R34 comp is currently dead and I will be most likely doing that to it if the spare one in the shed is also leaky.
    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
×
×
  • Create New...