Jump to content
SAU Community

Recommended Posts

hey guys got afew left over parts that need to be sold,

everything listed is in good working order:

apexi pen style turbo timer (black) with loom - $60

R33 gtr power steering pump - $80 (think it comes with bracket but will double check)

R33 gtr A/C compressor - $80

gtr stock boost control solenoid, still has restrictor in the hose - $60

rb26 timing belt cover, good conidition - $100

3" xforce high flow cat - $100

3" r32 gtr cat back exhaust, mild steel, stainless rear muffler - $200

gtr carbon fibre pod filter shield, few small cracks/marks - $80

1 set of late model R33 gtr coil packs - $120

1 set of late model R32 gtr coil packs - $100

located in sydney but willing to post, can send pics if requested

thanks

Link to comment
https://www.sau.com.au/forums/topic/402300-gtr-parts-stock-aftermarket/
Share on other sites

afew extra parts:

stock gtr intake pipes: $80

post-24984-0-79695100-1339486937_thumb.jpg

lower rb26 timing belt cover: $60

post-24984-0-24354300-1339487030_thumb.jpg

RB26 timing belt cover: $100

post-24984-0-59672400-1339487116_thumb.jpg

NGK Laser Platinium spark plugs PFR6A-11 Literaly only used for 2000kms before been changed as they were the wrong heat range for my setup, these are exactly the same model plugs nissan use for the RB26DETT engine, paid around $130 for these - $50 !

post-24984-0-96224900-1339487386_thumb.jpg

post-24984-0-93498000-1339487421_thumb.jpg

post-24984-0-97080900-1339487464_thumb.jpg

  • 1 month later...
  • 1 month later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...