Jump to content
SAU Community

Defect Questions Advice?

MAS_R33

By MAS_R33,
in Australian Capital Territory

 Share

Recommended Posts

Sinista32 Grand Master

Sinista32

Posted
Posted

A few years back now I got my arse handed to me by a guy in a gold Top Secret built 32.

Police turned up later when a Security guard called it in.

Poor bugger came around the bottom end to see 3 Skylines racing down Sheppard st towards him side by side :(

Silly pricks.

Hanso Experienced

Hanso

Posted
Posted

Too bad the cops both here in the ACT or over the border in NSW don't crack down on all the tools on the Kings Highway or Macs Reef Road that I deal with whenever I go to work out at Bungendore. Tradies seem to be excused from obeying road rules. Defect those guys for the illegal mods they have.

Scar Collaborator

Scar

Posted
Posted

Too bad the cops both here in the ACT or over the border in NSW don't crack down on all the tools on the Kings Highway or Macs Reef Road that I deal with whenever I go to work out at Bungendore. Tradies seem to be excused from obeying road rules. Defect those guys for the illegal mods they have.

Tell me about it.. dodgy crap along the way between bungers and canberra daily..
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      newbie attempts the GTR life.

      By sunsetR33 · Posted

      thanks mate, one of the reasons I even bought it to be fair.
    • sunsetR33
      RB26 turbo oil banjo bolts

      By sunsetR33 · Posted

      I found parts on EFI Solutions webshop that seemed to be the accurate ones. I haven't gotten around to fitting the turbos back on the car yet since I still have to deal with the shitty crack in the engine block. But I'm confident that the bolts I ordered will fit. According to EFI they are also 7-16/24. The reason M11x1 got involved here is because it is apparently very similar to 7-16/24.
    • Kaptain
      R33 general questions

      By Kaptain · Posted

      Well, to be fair to the car I've driven it daily for almost a decade now, although in that time only put on 50k, as it just recently passed 100k miles early this year. For the most part its been fine because I've been able to source parts from AUS like jacks jdm and a few places in Japan, some things like pads have been easy since 300z pads swap right in... I realize its probably at that time in its life i should find a new DD (but I rent and only have so much space, no garage) so new cars just complicate things. As it is older though, I recognize its about that time as with my '67 GTO to maybe side step and find an alternative, but if i can keep driving it... I want to.   That said, I may just look into a local shop that might be able to, problem is the mechanic I work with has limited space as a mom and pop operation, and he's a busy busy man, so id need to find out if he can keep the car in the meantime, which may or may not be practical for him. Maybe I'll just buy one off jacks jdm and get that refurbed /shrug.. just looking at options and what others may have to offer for advice on the matter. Like I said, its hard finding people around here who actually have one, I've had mine 9 and a half years and I've met 3 others, and they are all military, one was oem from 95 with 30k miles (rip that car... guy got hit after someone crossed s double yellow, totaled it)
    • zoomzoom
      WGNC34 Rear springs

      By zoomzoom · Posted

      I've noticed my rear springs sag a bit compared to the fronts. I have stock springs and KYB struts. The front wheels are pretty consistent in their ride height, but compared to the front wheels, one of the rears sits 20mm lower, and the other 40mm lower. This negatively affects the ground clearance, and also angles the headlights up. What are some some economical options for new springs? Or information like good spring rates, lengths  in order to find a suitable replacement etc Far from lowering the car, I'd prefer to raise it a bit to keep it ground clearance friendly.
    • Blakeo
      RB25DET NEO Cylinder Head

      By Blakeo · Posted

      I searched for ages as well, I'm importing an engine to get the head off it. 
×
×
  • Create New...