Jump to content
SAU Community

Recommended Posts

FYI -

R34 GTR wuith aftermarket immoboliser in most cases still runs NATS which means you need to get the transponder programmed before the key will start the car.

R34 GT-T with aftermarket immoboliser does not need programming and you can get a key cut and it will just turn and start.

Thanks for the info, and welcome to Far North Newcastle :D

FYI -

R34 GTR wuith aftermarket immoboliser in most cases still runs NATS which means you need to get the transponder programmed before the key will start the car.

R34 GT-T with aftermarket immoboliser does not need programming and you can get a key cut and it will just turn and start.

Thanks heaps for that, going to get a key today then ill have it coded when i get the car back :D

well, some think planks of wood if no one has any propper ramps like the ones u use to get cars on the back of a trailer, use them to take out a heap of the angle off the ferry ramp

Martin was all over the planks of wood idea, the ramps are good but unless we get a stagea or a ute to come then they would be too long for all of our cars i reckon!

Martin was all over the planks of wood idea, the ramps are good but unless we get a stagea or a ute to come then they would be too long for all of our cars i reckon!

Not if they are short enough to sit in the boot.

Four short planks would be better than two longs ones and save a bit of time as well

I can still bring timbers and lots of them as well

But I like the idea of making a decision on the day

Not if they are short enough to sit in the boot.

Four short planks would be better than two longs ones and save a bit of time as well

I can still bring timbers and lots of them as well

But I like the idea of making a decision on the day

Well OK, lets go back to Plan A.... Ill set up the cruise including the Ferry based on your wood etc and THEN if we get any epically low cars on the cruise we will make the call on the day! Once again we can always split and meet back on Old Pac but would rather try keep the group together!

Happy to help.

I got one of my keys programmed by a mobile locksmith called Ultimate Lock in Sydney. It was around $100.

Cheaper than Hornsby Nissan. I received the same quote of ~ $180.

And not done by an apprentice ;)

Well OK, lets go back to Plan A.... Ill set up the cruise including the Ferry based on your wood etc and THEN if we get any epically low cars on the cruise we will make the call on the day! Once again we can always split and meet back on Old Pac but would rather try keep the group together!

hey man my wood is always good :3some:

Ok just bought the new key, will have it coded once i get the car back, then ill sort out the immobiliser, atleast ill have a spare key now :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
    • 😜 hopefully we get this instead of a new R36 GTR due to recent financial problems at Nissan. Nismo to sell a complete kit with RB26 and driveline. All starts making sense (ok maybe not) once the Nissan Leaf's (Leaves?) with stuffed EV motors/batteries hit the market cheap
    • Hi guys , have had allot of time for SAU and has helped me out heaps in the past so I thought I would give it a go , I have my QM1 white NUR for sale 1 of 156 examples built by Nissan. Serious personal messages please if interested and details will be provided , asking 500k 
×
×
  • Create New...